Dyno tuning in Florida??????
#1
Thread Starter
Join Date: Sep 2002
Location: Orange Park, Florida, USA
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Dyno tuning in Florida??????
Im looking for a place hopefully close to North Florida that does dyno tuning, and what it would cost me to tune my car.
95dx
95 USDM gsr motor
ctr pistons
slightly ported head
AN-R IM gasket
STR cam gears
CAI
2.25 exhaust
looking for JDM ITR header
Will have CTR intake cam by then
There is a place here near me SpeedCraft Engineering but i dont really like some of the people up there and wouldnt trust them with my car in any way.
The only shop around here i like is stage6 motorsports and they dont have there dyno yet.
Speedcraft does it for 100-125 an hour and supply a B&M fuel pressure regulator for free. I figure 1.5-2 hours will be fine right?
How much does it usually cost?
95dx
95 USDM gsr motor
ctr pistons
slightly ported head
AN-R IM gasket
STR cam gears
CAI
2.25 exhaust
looking for JDM ITR header
Will have CTR intake cam by then
There is a place here near me SpeedCraft Engineering but i dont really like some of the people up there and wouldnt trust them with my car in any way.
The only shop around here i like is stage6 motorsports and they dont have there dyno yet.
Speedcraft does it for 100-125 an hour and supply a B&M fuel pressure regulator for free. I figure 1.5-2 hours will be fine right?
How much does it usually cost?
#4
Re: (spencedogg)
Seeing how you are in Jacksonville you could try:
Speedcraft
Stage 6
These are the only places I know of.
edit. I just saw your choices. (I dont like most of the people at speedcraft also)
and chances are that you wouldnt like stage6 also, seeing how the owner of stage6 and the owner of speedcraft are brothers.
I went to order a part from speedcraft one time: All they do is order whatever part you are looking for off of Nopi.com, and they charge you shipping also. Same with stage6, they have you wait for the longest time because they get their parts from speed craft.
I went through a lot of crap because I was going to get a greddy evo, well I never got one.
p.s.= you could always try mustang motorsports.
Speedcraft
Stage 6
These are the only places I know of.
edit. I just saw your choices. (I dont like most of the people at speedcraft also)
and chances are that you wouldnt like stage6 also, seeing how the owner of stage6 and the owner of speedcraft are brothers.
I went to order a part from speedcraft one time: All they do is order whatever part you are looking for off of Nopi.com, and they charge you shipping also. Same with stage6, they have you wait for the longest time because they get their parts from speed craft.
I went through a lot of crap because I was going to get a greddy evo, well I never got one.
p.s.= you could always try mustang motorsports.
#5
dAng!
iTrader: (1)
Join Date: Jun 2001
Location: alabama/florida
Posts: 7,645
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno tuning in Florida?????? (slowdx)
there's also a shop in tallahassee.. NRG Performance
In the jacksonville area, you can call DFE Enterprises and they could probably help you out also. 904-378-4480 .. ask for Don.
In the jacksonville area, you can call DFE Enterprises and they could probably help you out also. 904-378-4480 .. ask for Don.
#6
Thread Starter
Join Date: Sep 2002
Location: Orange Park, Florida, USA
Posts: 1,659
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Quick EX)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Quick EX »</TD></TR><TR><TD CLASS="quote">Seeing how you are in Jacksonville you could try:
Speedcraft
Stage 6
These are the only places I know of.
edit. I just saw your choices. (I dont like most of the people at speedcraft also)
and chances are that you wouldnt like stage6 also, seeing how the owner of stage6 and the owner of speedcraft are brothers.
I went to order a part from speedcraft one time: All they do is order whatever part you are looking for off of Nopi.com, and they charge you shipping also. Same with stage6, they have you wait for the longest time because they get their parts from speed craft.
I went through a lot of crap because I was going to get a greddy evo, well I never got one.
p.s.= you could always try mustang motorsports.</TD></TR></TABLE>
I know the head mechanic used ot work at speedcraft and ten quit, but nah i like stage 6 im friends with vince but they just dont have a dyno. They have done some work for me int he past i like them. They are way ahead speedcraft in standards and work ethics.
Speedcraft
Stage 6
These are the only places I know of.
edit. I just saw your choices. (I dont like most of the people at speedcraft also)
and chances are that you wouldnt like stage6 also, seeing how the owner of stage6 and the owner of speedcraft are brothers.
I went to order a part from speedcraft one time: All they do is order whatever part you are looking for off of Nopi.com, and they charge you shipping also. Same with stage6, they have you wait for the longest time because they get their parts from speed craft.
I went through a lot of crap because I was going to get a greddy evo, well I never got one.
p.s.= you could always try mustang motorsports.</TD></TR></TABLE>
I know the head mechanic used ot work at speedcraft and ten quit, but nah i like stage 6 im friends with vince but they just dont have a dyno. They have done some work for me int he past i like them. They are way ahead speedcraft in standards and work ethics.
#7
Re: (slowdx)
Yeah I went to speedcraft a while back with a friend that was going to get a swap.
He called and they told him to come in so they could tell him what was going to be done and so they could tell him a price.
Well we get there and one guy asks if we need any help, so my friend tells him yeah. Well we are standing there and not one person says a damn thing.
Well he finally gets the swap done thanks to a few people who were friends, well he goes back (seeing how there isnt too many places to go around here in Jax for parts) and we walk in the place and he asks if they sell throttle bodies. The guy says "No, but we got some new altezzas in" I dont know if this guy was joking or really meant what he said
He called and they told him to come in so they could tell him what was going to be done and so they could tell him a price.
Well we get there and one guy asks if we need any help, so my friend tells him yeah. Well we are standing there and not one person says a damn thing.
Well he finally gets the swap done thanks to a few people who were friends, well he goes back (seeing how there isnt too many places to go around here in Jax for parts) and we walk in the place and he asks if they sell throttle bodies. The guy says "No, but we got some new altezzas in" I dont know if this guy was joking or really meant what he said
Trending Topics
#8
Re: (Quick EX)
definately going to have to agree with spence on this one. take it to john of secret services. he's the only one i would trust to mess with my honda. i have only heard good comments about him. plus, both him and taylor are some cool *** guys.
P.S. he did the tuning on my car and hondata installation. one hell of a drive but well worth it. 1-727-571-1450 ask for john or taylor
P.S. he did the tuning on my car and hondata installation. one hell of a drive but well worth it. 1-727-571-1450 ask for john or taylor
#10
Junior Member
Join Date: Apr 2003
Location: Colorado Springs, Colorado, USA
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Re: Dyno tuning in Florida?????? (slowdx)
umm i donno where in fl u live but i live close to pensacola in crestview well theres a guy here that awsome at it !!!!
#12
I never narc'd on nobody!
iTrader: (1)
Re: Dyno tuning in Florida??????
Did you really just bump a 12 year old dead thread to ask that, instead of using Google? Hint: The answer to your question is in the context of this post.
If that's still to vague for you...holy **** man, Google.
Urban Dictionary: bump
If that's still to vague for you...holy **** man, Google.
Urban Dictionary: bump
Thread
Thread Starter
Forum
Replies
Last Post