D16Z6 Engine Rebuild (pictures)
#51
Honda-Tech Member
Re: D16Z6 Engine Rebuild (pictures)
good job.
were i find the clearaces for main and road bearings?
i do a low comp. rebuild on my z6 and i want to check clearances but i dint find the min and max ones and i want ti see if all ok.
sorry my inglish im for portugal and now live in england.
were i find the clearaces for main and road bearings?
i do a low comp. rebuild on my z6 and i want to check clearances but i dint find the min and max ones and i want ti see if all ok.
sorry my inglish im for portugal and now live in england.
The following users liked this post:
#53
Honda-Tech Member
Re: D16Z6 Engine Rebuild (pictures)
How much does one of these go for? I currently have parts for one engine, but i have two blocks and one head. Im trying to make a profit off it because i bought it all for 50 bucks. Its not in nice silver condition like this one is but i'm looking to do as much DIY for the money. Any advice?
#55
Honda-Tech Member
Re: D16Z6 Engine Rebuild (pictures)
I just did my rebuild the exact same way maybe a year ago. I did a wiseco & eagle build so i had a few extra steps of knotching the block and girdle for the rods and rod bolts. LoL Vtec definately does not crack or make any real noticeable power on the SOHC. Even with turbo you hardly feel or hear it. Its not like a B/H/K series kind of vtec. Nice right up. I used the plasi gauge and lucus break in lube as well.
#59
Honda-Tech Member
Re: D16Z6 Engine Rebuild (pictures)
For the first one, it is said you just need to be extra patient, and take all the time needed to get things done right.
After that, magic operates, and with guides like this one, you (almost) can't go wrong
#60
Re: D16Z6 Engine Rebuild (pictures)
hello doing a full rebuild on my d16z6 wondering what rebuild kit you used, and where you got it? this is the best breakdown for my friends who dont know anything about japanese cars. thank you
#63
The Grumpiest
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: D16Z6 Engine Rebuild (pictures)
You've asked this question 3 times already. Did you bother trying to Google the information? The answer would be no.
https://www.google.com/webhp?sourcei...w=1904&bih=929
What does identifying your cylinder head have to do with this thread?
https://www.google.com/webhp?sourcei...w=1904&bih=929
What does identifying your cylinder head have to do with this thread?
#64
Re: D16Z6 Engine Rebuild (pictures)
thanks buddy i read em kinda my first project car trying 2 read up as much as i can on it kinda more of a certified body tech than a mechanical tech oh n sorry if i posted it in the wrong place
The following users liked this post:
The following users liked this post:
The following users liked this post:
The following users liked this post:
The following users liked this post:
#75
Re: D16Z6 Engine Rebuild (pictures)
I was a little worried about doing the full rebuild that my D16Z6 needs... after reading this write-up, im not concerned at all! Nice job, will be referring to this within the next few weeks.