d16y8 in a eg won't rev out
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: ft lauderdale, fl
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
d16y8 in a eg won't rev out
i just put a d16y8 in my EG and it will not rev pass 6500 rpm? I have changed ecu for a stock P28 and samething, i have P28 with chrome. i checked vtec is working at round 4800. car pulls strong till 6200-6500 and then it hits a limiter.
and i have NO CEL or codes if i jump it out
things i have tried already
new distirbutor
new cap and rotor
new spark plug wires
new plugs
checked ignition timing
checked wiring (what i can see)
thanks
and i have NO CEL or codes if i jump it out
things i have tried already
new distirbutor
new cap and rotor
new spark plug wires
new plugs
checked ignition timing
checked wiring (what i can see)
thanks
#3
Honda-Tech Member
Thread Starter
Join Date: Sep 2002
Location: ft lauderdale, fl
Posts: 231
Likes: 0
Received 0 Likes
on
0 Posts
Re: d16y8 in a eg won't rev out
no its 7200 but i found the problem i went to the dyno (THANKS HPC) and it was reving to 7200 but my factory tach is of by 500-700 rpm ,O'well
but i made 115 whp on a stock D16 with CAI, and exhaust and HPC DERF special tune
thanks Fred
but i made 115 whp on a stock D16 with CAI, and exhaust and HPC DERF special tune
thanks Fred
Thread
Thread Starter
Forum
Replies
Last Post
lmiguelvv
Honda Civic / Del Sol (1992 - 2000)
4
10-04-2004 01:42 PM