sycotickid

i want to go from a non v-tech to a v-tech moter via the mini me swap. what moter should i be getting the head off of and what else should i grab when im stripping the head.....i know i need the ecu fuel rail and v-tech solenoid


charlie

EK k kay

You also need the handset, battery, base unit, and an RJ-11 cord which can be purchased at a local Radio Shack.

sycotickid

how bout an answer from someone thats not a complete smart ***

sycotickid

all i need to kno is what engine i need to pull the head off of?

92hatchling

Ok seeing how your new ill help you out. You need the head of a d16z6 or d16y8. But theres more invloved than just the head. Use the <U></U>red search button in the upper left hand side of the screen for more info. Theres a huge write up on here about this with lots of useful info so good luck .

EJ4door

http://www.clubcivic.com/board...47921

here ya go

sycotickid

thanks EJ4door that post was awsome n helped me out alot thanks i appreiciate it

fizeks

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EJ4door &raquo;</TD></TR><TR><TD CLASS="quote">http://www.clubcivic.com/board...47921

here ya go </TD></TR></TABLE> ??lol why did u give him a link to another forum when theyre using the same post that bauley made along time ago? i mean u have to be blind not to see the sticky on the top of the forum....

BauleyCivic

The Original - https://honda-tech.com/zerothread?id=554053

Often imitated, never duplicated.