CTR pipping..
#2
Re: CTR pipping.. (fluxekhatch)
I have a CTR exhaust and its no where near 2.5, more like 2.25
#5
Re: CTR pipping.. (fluxekhatch)
you act like you don't know how much a difference 1/4 inch actually is.
#6
Re: CTR pipping.. (fluxekhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fluxekhatch »</TD></TR><TR><TD CLASS="quote">you act like a 1/4 of an inch is so much and noticeable.. thanks though..</TD></TR></TABLE>
.9 sq in. difference in area - ~20% larger pipe = more flow (if u need it)...
.9 sq in. difference in area - ~20% larger pipe = more flow (if u need it)...
#7
Honda-Tech Member
Join Date: Jan 2003
Location: NC
Posts: 2,878
Likes: 0
Received 0 Likes
on
0 Posts
Re: CTR pipping.. (fluxekhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fluxekhatch »</TD></TR><TR><TD CLASS="quote">you act like a 1/4 of an inch is so much and noticeable.. thanks though..</TD></TR></TABLE>
When you are talking cross-sectional area as in with an exhaust, then 1/4 inch can be a big deal.
When you are talking cross-sectional area as in with an exhaust, then 1/4 inch can be a big deal.
Trending Topics
#8
Honda-Tech Member
Join Date: Nov 2001
Location: CALIFORNIA
Posts: 15,366
Likes: 0
Received 0 Likes
on
0 Posts
Re: CTR pipping.. (fluxekhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fluxekhatch »</TD></TR><TR><TD CLASS="quote">correct me if i am wrong but the CTR piping is about 2.5" a little under but close to it. let me know and will ITR pipping fit an ek hatch</TD></TR></TABLE>
You were corrected.
You were corrected.
Thread
Thread Starter
Forum
Replies
Last Post
Bbasso
Acura Integra Type-R
9
01-18-2004 05:49 PM