mtny

I searched but couldn't find anything... I just installed some SiR headlights on my EM1 and I touched one of the city light bulbs like a dumbass and it went out in less than 2 days. What size city light bulb do I need? Thanks!

monocam

not sure what the part number is but, its the same bulb as the one that lights up ur rear lic. plate. Just go to pep boys and ask for that one

BlueIntegraBoy

iTrader: (5)

I believe it's 194

Padawan

The city light bulbs are low-wattage incandescent bulbs. Unlike halogen bulbs, there is no issue with touching the glass with your fingers during installation. If the bulb has failed already, it was due to something else.

mtny

Oh ok. Maybe the wiring where I spliced it came loose. Thanks so much.

Jimmy

iTrader: (5)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy &raquo;</TD></TR><TR><TD CLASS="quote">I believe it's 194</TD></TR></TABLE>

I second that!

JDM-EJ1

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Padawan &raquo;</TD></TR><TR><TD CLASS="quote">The city light bulbs are low-wattage incandescent bulbs. Unlike halogen bulbs, there is no issue with touching the glass with your fingers during installation. If the bulb has failed already, it was due to something else. </TD></TR></TABLE>

fms1day

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueIntegraBoy &raquo;</TD></TR><TR><TD CLASS="quote">I believe it's 194</TD></TR></TABLE>
Or 168s right? aren't those two bulb sizes the same?

mtny

The city socket was a f'd. Trying to get a replacement from PWjdm.