Carbing lower rear tie bar...
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Port Wentworth, Georgia
Posts: 723
Likes: 0
Received 0 Likes
on
0 Posts
Carbing lower rear tie bar...
Does anyone have any experience with this part? I know alot of their upper braces are very good, can the same reults be expected from this product? It is for an Ek by the way. thanks
#3
Honda-Tech Member
Re: Carbing lower rear tie bar... (cambopheonix56)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cambopheonix56 »</TD></TR><TR><TD CLASS="quote">Why not look into a sway bar? I think you will be much happier. I was.</TD></TR></TABLE>
Both would be great!
Both would be great!
Trending Topics
#8
HT White Ops
iTrader: (1)
Join Date: Mar 2006
Location: I see what you did there.
Posts: 16,222
Likes: 0
Received 3 Likes
on
3 Posts
Re: (EX-T)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EX-T »</TD></TR><TR><TD CLASS="quote">Pix of the ASR piece?</TD></TR></TABLE>
#11
HT White Ops
iTrader: (1)
Join Date: Mar 2006
Location: I see what you did there.
Posts: 16,222
Likes: 0
Received 3 Likes
on
3 Posts
Re: (EX-T)
You need to learn how to read, man. First, you asked me where to buy the ASR brace when "Password JDM" is printed right on the image.
Then you ask "what LCA's are those" when SSR is stamped right on the LCA.
Then you ask "what LCA's are those" when SSR is stamped right on the LCA.
#12
Honda-Tech Member
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Eran)
Eran, you really think the asr piece is better than the comptech? what about the ST version? i thought the st comptech and asr where all equal with beaks being below those because its 2 piece.
#13
HT White Ops
iTrader: (1)
Join Date: Mar 2006
Location: I see what you did there.
Posts: 16,222
Likes: 0
Received 3 Likes
on
3 Posts
Re: (blinx9900)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by blinx9900 »</TD></TR><TR><TD CLASS="quote">Eran, you really think the asr piece is better than the comptech? what about the ST version? i thought the st comptech and asr where all equal with beaks being below those because its 2 piece.</TD></TR></TABLE>
I think a 1/2" plate of steel owns the crap out of the old-style comptech and the beaks kit. The new ST bar is pretty nice, but I still think that the rigidity of the ASR is plenty.
I think a 1/2" plate of steel owns the crap out of the old-style comptech and the beaks kit. The new ST bar is pretty nice, but I still think that the rigidity of the ASR is plenty.
#14
Honda-Tech Member
Join Date: Nov 2005
Location: Turn Right, CA, US
Posts: 1,694
Likes: 0
Received 0 Likes
on
0 Posts
#17
Honda-Tech Member
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: (spock_rocker)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spock_rocker »</TD></TR><TR><TD CLASS="quote">the last time i checked he was asking about a CARBING tie bar?! i dont have mine on yet.. but i should by next month</TD></TR></TABLE>
eat **** hall monitor, were discussing related suspension parts.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran »</TD></TR><TR><TD CLASS="quote">I think a 1/2" plate of steel owns the crap out of the old-style comptech and the beaks kit. The new ST bar is pretty nice, but I still think that the rigidity of the ASR is plenty.</TD></TR></TABLE>
god damn! .5"!! the st one i have is about .25" billet. either way im happy with my set up. is the asr piece cast or billet? anybody know?
eat **** hall monitor, were discussing related suspension parts.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran »</TD></TR><TR><TD CLASS="quote">I think a 1/2" plate of steel owns the crap out of the old-style comptech and the beaks kit. The new ST bar is pretty nice, but I still think that the rigidity of the ASR is plenty.</TD></TR></TABLE>
god damn! .5"!! the st one i have is about .25" billet. either way im happy with my set up. is the asr piece cast or billet? anybody know?
#19
Junior Member
Join Date: Sep 2006
Location: In My Kitchen, Ca, 90250
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Re: (EX-T)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EX-T »</TD></TR><TR><TD CLASS="quote">What LCAs are those, Captain Obvious!</TD></TR></TABLE>
Those are omni's!
Those are omni's!
#20
Honda-Tech Member
Join Date: Mar 2003
Location: Austin/Bastrop, TX, USA
Posts: 1,411
Likes: 0
Received 1 Like
on
1 Post
Re: (Eran)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
This setup gives me a chubby.
</TD></TR></TABLE>
This setup gives me a chubby.
#22
Join Date: May 2006
Location: in yo fridge eatin yo foodz
Posts: 1,567
Likes: 0
Received 0 Likes
on
0 Posts
Re: (grayegcivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by grayegcivic »</TD></TR><TR><TD CLASS="quote">
Those are omni's!</TD></TR></TABLE>
another hooked on phonics drop out.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran »</TD></TR><TR><TD CLASS="quote">You need to learn how to read, man. First, you asked me where to buy the ASR brace when "Password JDM" is printed right on the image.
Then you ask "what LCA's are those" when SSR is stamped right on the LCA.</TD></TR></TABLE>
Those are omni's!</TD></TR></TABLE>
another hooked on phonics drop out.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Eran »</TD></TR><TR><TD CLASS="quote">You need to learn how to read, man. First, you asked me where to buy the ASR brace when "Password JDM" is printed right on the image.
Then you ask "what LCA's are those" when SSR is stamped right on the LCA.</TD></TR></TABLE>
#23
Junior Member
Join Date: Sep 2006
Location: In My Kitchen, Ca, 90250
Posts: 591
Likes: 0
Received 0 Likes
on
0 Posts
Re: (93eg2james)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93eg2james »</TD></TR><TR><TD CLASS="quote">
another hooked on phonics drop out.
</TD></TR></TABLE>
and your point is?????
another hooked on phonics drop out.
</TD></TR></TABLE>
and your point is?????
#25
Honda-Tech Member
Join Date: Sep 2006
Location: poopfacepartytime, ca, usa
Posts: 5,856
Likes: 0
Received 0 Likes
on
0 Posts
Re: (schpiel)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by schpiel »</TD></TR><TR><TD CLASS="quote">I guess I got like 2 answers on the carbing bar. awesome. </TD></TR></TABLE>
dont cry son, there good, but were trying to show you some stuff is better and maybe you can see that and avoid buying the same part twice, cause once you step up to a bigboy rear sway bar that carbing will need to come off for a subframe brace.
dont cry son, there good, but were trying to show you some stuff is better and maybe you can see that and avoid buying the same part twice, cause once you step up to a bigboy rear sway bar that carbing will need to come off for a subframe brace.