b20z idleing in my em1
#1
Junior Member
Thread Starter
Join Date: May 2006
Location: NYC
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
b20z idleing in my em1
I finally got this damn thing started after changing the distributor and now the car is idleing. What could it be?
A friend of mine recommended to bleed the antifreeze while the car is running by losening the bolt in front of the block. Been there done that, now what?
I dont know if this has anything to do with it but where my b-pipe meets the cat, I dont have a gasket. Also I didnt tighten it all the way because of this. Other than that, what could it be?
A friend of mine recommended to bleed the antifreeze while the car is running by losening the bolt in front of the block. Been there done that, now what?
I dont know if this has anything to do with it but where my b-pipe meets the cat, I dont have a gasket. Also I didnt tighten it all the way because of this. Other than that, what could it be?
Thread
Thread Starter
Forum
Replies
Last Post
jdmspoonitr
Acura Integra Type-R
23
11-25-2002 04:46 PM