mattyv

b18b into 99 dx (harness)

I know i have to re-pin the dizzy. Change IACV plug to the 2 wire(green & black) stock LS plug, and extend the crank positioning sensor. My question is how long should i extend it? Its in a pretty tight spot and would be hard to pull a measurement.

If anyone else has anymore info on what i have to do harness wise would be much help. TIA

hmtcrxsir

its hard to say. I usually just eye ball it and cut it to proper length but even eyeballing require more cutting in the end.

mattyv

yea.. was trying to save that as the last option

turbo civ

im puttin a b18b1 from a 98 teg in my 00 civic coupe. tryin to get the wiring issues straightened out. im gettin mixed thoughts from many people. can someone straighten out what i need to do to the harness and other wires. also ive been told by 2 speed shops that my d16y7 ecu will work with my b18b? has anyone else heard or tried that>

mattyv

im pretty sure what your asking is a completly different question. Don't thread jack make your own post.

TTT for some answers

hmtcrxsir

usually i wire everything up while engine is out of the car.