vmolla1

Ok I have a stock b16b head I want to rebuild... I want to port n polish, valve job, and anything else that I have to do to build the head like springs, retainers, and valve guides...
And:
Skunk 2 pro 1 cams
Ws2 exhaust
Headers
And tune

Just wondering what kind of horse power I can make???

Tyler Dirden

iTrader: (3)

Not enough info to know HP. I have got brand new Skunk2 Pro nitrided valves for that head if your interested. Sell em cheaper than you can buy them ANYWHERE new and ship free too. Could use som Christmas money.

1FASTHF

I have a Manley spring and titanium retainer kit to go with those valves too. Pm me if interested.

TypeRfit

iTrader: (6)

Knowing what is in the head means nothing without knowing what block, compression, bore etc you are using

vmolla1

It's a b16 type r block
LSD trans
I'm kinda new to all this so I don't no much...
Just tryin to get ideas I guess

doctorake

Bench racing, not allowed

Moi Moi

you have to know which piston you are using so you can go whit a flat valve etc.... if you are using stock one pct i recomended to use flat valves.... and whit a good steup and a good job porting... you will make 190-+

B_Swapped93

op is just dreaming and has no real intention of doing anything.

NZXTInerTia

inb4lock.