b16 obd2 VTEC problems
#1
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Perth, Scotland
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
b16 obd2 VTEC problems
Hey guys.
My friend put a b16 in his ek a couple of weeks ago. It runs and idles fine but having a few problems with VTEC engaging.
If he starts the car from cold, and lets it warm up it will not cross into VTEC.
If he then switches the car off and on again, it goes in and out of VTEC no problems.
Any idea how to fix this?
My friend put a b16 in his ek a couple of weeks ago. It runs and idles fine but having a few problems with VTEC engaging.
If he starts the car from cold, and lets it warm up it will not cross into VTEC.
If he then switches the car off and on again, it goes in and out of VTEC no problems.
Any idea how to fix this?
#2
Honda-Tech Member
#6
Honda-Tech Member
Thread Starter
Join Date: May 2010
Location: Perth, Scotland
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Re: b16 obd2 VTEC problems
I've done most of these checks
I think i'll explain again
When he starts the car from cold and drives for 30 mins, the engine temp sensor reads normal operating temperature but no vtec.
He then turns the key off and on again and vtec will work.
It's an ek4 (originally with a d14) running a b16a2 with a P2T ecu
I have no idea what this would be.
I think i'll explain again
When he starts the car from cold and drives for 30 mins, the engine temp sensor reads normal operating temperature but no vtec.
He then turns the key off and on again and vtec will work.
It's an ek4 (originally with a d14) running a b16a2 with a P2T ecu
I have no idea what this would be.
Thread
Thread Starter
Forum
Replies
Last Post
Boosted_CRX_507
Honda CRX / EF Civic (1988 - 1991)
8
12-19-2008 05:57 PM
gianinline
Engine Management and Tuning
4
06-03-2008 06:03 PM
Vtecme92
Honda Civic / Del Sol (1992 - 2000)
1
07-06-2006 03:30 PM