auto to manual
#1
Thread Starter
Join Date: May 2005
Location: visalia, ca, us
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
auto to manual
okay so i have searched and searched and i have been told that when doing this swap ona 99-00 civic ex you need to swap out the intake manifold to a manual one because they are different so whats different and is this even true or can you use the manual one?
#2
Junior Member
Join Date: Jan 2004
Location: Birmingham, AL, USA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Re: auto to manual (justinfetterly)
check out this article (and it's stickied in this forum)....
ECU Code Thread, Pinout, ETC.
it would probably be a good idea to use a manual ECU as well as a manual intake manifold. the fuel maps are going to differ between an auto and manual. I know this has been covered one gazillion times already, but scroll down (a little past half way) to the "99-01 Civic/Integra ECU Pinout" Picture and mimic what's been done there. It works.
ECU Code Thread, Pinout, ETC.
it would probably be a good idea to use a manual ECU as well as a manual intake manifold. the fuel maps are going to differ between an auto and manual. I know this has been covered one gazillion times already, but scroll down (a little past half way) to the "99-01 Civic/Integra ECU Pinout" Picture and mimic what's been done there. It works.
Thread
Thread Starter
Forum
Replies
Last Post