ARP Wheel Stud Install
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2002
Location: Jessica Beale AFB, Califas...
Posts: 2,278
Likes: 0
Received 0 Likes
on
0 Posts
ARP Wheel Stud Install
ARP Wheels Studs Part# 100-7708 12mm x 1.5.
Front needs to be taken off and spindles have to be pressed. Rears are much easier, if you don't have a ABS sensor, if not it can be removed for better access. NOTE: It is easier to bore the old hole open a little, due to the different kurl size stock: .480 ARP: .508 ? .
Used bearing to bring the kurl thru.
J & D Cold Air induction box.
In Carbon Fiber of course.
Does anyone know the value of these? Duke, Footloose, BBQ
More pics of the Car today when I have better light.
[Modified by JDMSir-G, 10:01 AM 11/3/2002]
Front needs to be taken off and spindles have to be pressed. Rears are much easier, if you don't have a ABS sensor, if not it can be removed for better access. NOTE: It is easier to bore the old hole open a little, due to the different kurl size stock: .480 ARP: .508 ? .
Used bearing to bring the kurl thru.
J & D Cold Air induction box.
In Carbon Fiber of course.
Does anyone know the value of these? Duke, Footloose, BBQ
More pics of the Car today when I have better light.
[Modified by JDMSir-G, 10:01 AM 11/3/2002]
Thread
Thread Starter
Forum
Replies
Last Post
Type-Spaz
Acura RSX DC5 & Honda Civic EP3
26
08-16-2009 02:52 PM
jeff652
Road Racing / Autocross & Time Attack
9
01-25-2002 07:23 PM