me2si25

hey guys im new to the fourms so this might be a stupid queston but any way ill ask. i have a vafc2 in a 2000 civic si i hooked it all up acording to the book that comes with it and i think im doing the frist time setup right but when i turn the car on the idle is rough and it just dosent sound right if you guys know whats gon on please let me know becuse its dirveing me crazy ive tripple check my wires and everything looks ok...
thanks anthony
i know i already posted this topic but i got no answers so i hope mybe one of you guys can help me out ...

hondakevin21

Why not disconnect the unit and see if your car still runs rough?

Lmgrcivic

you sure that you were looking at the plugs the right way when you spliced all the wires in.

me2si25

i wil try that tonight.. the only thing im not sure about is holding the gas pedal down for 10 sec then realeasing when are u sapota do that
thanks anthony

GiMpInThaCiv

you got it set on 4 cyl with the arrow fasting up to the right?

me2si25

yes i have it set 4cy and the arow upwards and the vt 1

tha_badguy

any cels?

me2si25

the check engine light was blinking but than we hooked up a vtc wire cuz apexi said to do that on there web site but my check engine light is on all the time cus i have a tst pipe and i took the o2 sensor out
anthony

w0ng_sta

check what codes you are throwing.. its possible that you have more than 1 code at a time including the one for your missing o2