MidwestSi

Going to put them on my civ but i want the actual size and since i live in bumfuck egypt no one has one i can get the size from

Louie_EM1

Wait, edit: lemme measure

Ok, 6.5" long total DOHC VTEC
SOHC 5/8'' tall
VTEC 1.25'' tall

integra6650

dont forget the extra 3/4 inch for the H in vtech hehe

TABIAS

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integra6650 &raquo;</TD></TR><TR><TD CLASS="quote">dont forget the extra 3/4 inch for the H in vtech hehe</TD></TR></TABLE>

hahah

92b16vx

Why don't you just get the real ones?

http://www.hondaautomotivepart...BLEMS

zer0.

since we're on this topic...when people put the "DOHC VTEC" stickers on the quarter panels of their 92-95 hatches,do they cut them in order to put the "DOHC" on the lower part of the door

example:

H23AHybridEG

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zer0_2_6ixty &raquo;</TD></TR><TR><TD CLASS="quote">since we're on this topic...when people put the "DOHC VTEC" stickers on the quarter panels of their 92-95 hatches,do they cut them in order to put the "DOHC" on the lower part of the door

example:

</TD></TR></TABLE>

Why the hell would you want to do that? Just put the whole emblem on the rear quarter panel under the side molding where it belongs!

Turbo E

I cant seem to find "Bumfuck Egypt" on the map...

95excoupe

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H23AHybridEG &raquo;</TD></TR><TR><TD CLASS="quote">

Why the hell would you want to do that? Just put the whole emblem on the rear quarter panel under the side molding where it belongs!</TD></TR></TABLE>

In Japan thats how they have the decal...as far as I know at least.

Two_K Si

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 95excoupe &raquo;</TD></TR><TR><TD CLASS="quote">

In Japan thats how they have the decal...as far as I know at least.</TD></TR></TABLE>

This is true.

On a side note. When my EM1 went into a body shop for a small accident and some ding repairs, the dohc vtec stickers were peeled off when they resprayed my car. The owners of the body shop were originally from japan, and when they got me replacement dohc vtec stickers, they applied it the way shown in the picture. So it must be the way they are applied in japan since those guys used to live there lol. But is the placement of the stickers exclusive to eg civics, or do ek's have them that way to?

moto27cm

EKs have the whole thing on the rear quarters. The EGs have them split in half, however, on the EGs, the dohc goes on the door on both sides, while the VTEC goes on the quarter.

Mag00n

How about after this mod you replace your "ex" "dx" or "cx" emblem with a "Steal this modified Honda" emblem...

jmk2888

So does the EJ Coupe have the same sticker placement as the 99 Si???

92b16vx

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zer0_2_6ixty &raquo;</TD></TR><TR><TD CLASS="quote">since we're on this topic...when people put the "DOHC VTEC" stickers on the quarter panels of their 92-95 hatches,do they cut them in order to put the "DOHC" on the lower part of the door
</TD></TR></TABLE>
No, it comes as two pieces.