tercelrcr

Hello everyone i know this question has probably been asked a few time. but here goes anyways. I have a 95 civic coupe and the previous owned decided he didn't like the body line so he "shaved" it as he stated. I have had the car for 3yrs now and just notice the "shaving: was just him putting a ton of bondo in the line, and it started to crack. So i had a few days off work and decided to see what was hiding under all the filler. removed it all and sanded it down. now i am on the hunt for the side moldings for my coupe. I have searched online and am either finding them for over 200 a set or for a sedan or hatch only. My question is does anyone know what the difference is between the coupe and hatch moldings? I know the fender and door molding is the same is the quarter panel? I have found tons for the hatch for about 60 online

creepin2mph

I am curious about this also. I have a 93 hatch and previous owner did a number on the driver fender and door and as I look around for the moldings I see odd price changes between the two. Guess I may have to just go measure them all at the junkyard.

tercelrcr

well if and when you find out can you please post it up here. the junkyards around my all the civic are beat to hell or completely stripped

ej2civicjc

the coupe and hatch side moldings are the same on the fender and door but the coupe has a longer molding on the quarter panel, im pretty sure. You can get the exact molding for your coupe on password jdm...if you feel like spending $320 lol

deschlong

iTrader: (8)

Hmm, what does the moulding cost brand new from a US online dealer? The ones on PW:JDM are usually "thin" side mouldings (from Europe and Japan), so cost a premium.

Honestly there are so many Civics around me that get sent to the crusher 90% intact - it's really a shame.

Blacknight117

iTrader: (1)

Go to the site in my sig, punch in the car, and you can find them there. You will need all six pieces and the clips.