93_eg6 back pressure issue
05-11-2016, 01:58 PM
#1
Honda-Tech Member
Thread Starter
Join Date: May 2016
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
93_eg6 back pressure issue
Realised I posted this thread in the wrong spot so here it is again.
Hey guys. Just finished swapping a gsr, high compression build into my eg6. Sometimes on start up it has to turn over quite a few times before it actually fires and I've determined its due to a slight lack of back pressure. N/A and large exhaust piping. My question; is there such a device out there (like a butterfly valve or something) that will provide back pressure on start up and then open while running? Or is this ludicrous?
Hey guys. Just finished swapping a gsr, high compression build into my eg6. Sometimes on start up it has to turn over quite a few times before it actually fires and I've determined its due to a slight lack of back pressure. N/A and large exhaust piping. My question; is there such a device out there (like a butterfly valve or something) that will provide back pressure on start up and then open while running? Or is this ludicrous?
Thread
Thread Starter
Forum
Replies
Last Post
fastwanabe
Honda Civic / Del Sol (1992 - 2000)
3
08-07-2003 08:41 AM