93' Del Sol Si H23A1 Project.
#1
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
93' Del Sol Si H23A1 Project.
Hey guys, I've decided to sell my prelude shell, and Somewhat make the Del Sol part of the Prelude with parts from it. I'll go ahead and make a list of everything, things will be added when I think of it. Everything that is in Bold are things I already have. Thanks for checking this thread out. Don't have any pics at the moment, But I will start taking some tomorrow morning when I start pulling the motor out of the Prelude.
ENGINE:
- H23A1 Engine.
- M2S4 Transmission.
- Innovative H-Series Mounts.
- Innovative H-Series Axles.
- ARP Headstuds.
- Rosko Racing EGR Block Off Plate.
- eBay Butterfly Delete Plate.
ELECTRICAL:
- Wire Tuck.
- Sony Headunit.
EXTERIOR:
- OEM Headlights With Amber Corner Lights.
- Front Bumper with Shaved Reflectors.
- Hood with Shaved Windshield Nozzles.
- Mugen Replica Front Lip.
- OEM Mudguards.
- OEM Taillights All Red.
INTERIOR:
- All Grey Panels Redone In Tan.
- 4th Gen Prelude Tan Leather Seats.
- OEM Black Door Handles.
SUSPENSION/CHASSIS:
- Drag DR27 15 x 7 +10 offset.
- Nexen 3000 Tires. (195/45/15)
- F&F Type I Coilovers.
- F&F Lower Control Arms. (Polished)
That's all of the **** I can think of off the top of my head haha. Hopefully I can get this car up and running in a couple weeks. It's not going to be turbo'd right away, but that's the plans for the future. I don't plan on building it for atleast a year or two, so i'll have plenty of time to think of which route I'd like to go. I'm debating on getting an F20B that Way I don't have to sleeve it. I just like having the torque. I did have an H22 head for the frankenstein conversion but ran out of cash for the rest of the swap parts, however I sold that to get the cash for my mount kit. If any of you guys have any parts or come across any that may be useful for this build just let me know, and your price, etc. Anywho, i'll shut my mouth haha. Thanks for looking guys.
ENGINE:
- H23A1 Engine.
- M2S4 Transmission.
- Innovative H-Series Mounts.
- Innovative H-Series Axles.
- ARP Headstuds.
- Rosko Racing EGR Block Off Plate.
- eBay Butterfly Delete Plate.
ELECTRICAL:
- Wire Tuck.
- Sony Headunit.
EXTERIOR:
- OEM Headlights With Amber Corner Lights.
- Front Bumper with Shaved Reflectors.
- Hood with Shaved Windshield Nozzles.
- Mugen Replica Front Lip.
- OEM Mudguards.
- OEM Taillights All Red.
INTERIOR:
- All Grey Panels Redone In Tan.
- 4th Gen Prelude Tan Leather Seats.
- OEM Black Door Handles.
SUSPENSION/CHASSIS:
- Drag DR27 15 x 7 +10 offset.
- Nexen 3000 Tires. (195/45/15)
- F&F Type I Coilovers.
- F&F Lower Control Arms. (Polished)
That's all of the **** I can think of off the top of my head haha. Hopefully I can get this car up and running in a couple weeks. It's not going to be turbo'd right away, but that's the plans for the future. I don't plan on building it for atleast a year or two, so i'll have plenty of time to think of which route I'd like to go. I'm debating on getting an F20B that Way I don't have to sleeve it. I just like having the torque. I did have an H22 head for the frankenstein conversion but ran out of cash for the rest of the swap parts, however I sold that to get the cash for my mount kit. If any of you guys have any parts or come across any that may be useful for this build just let me know, and your price, etc. Anywho, i'll shut my mouth haha. Thanks for looking guys.
Last edited by Repsolo; 11-05-2012 at 08:55 AM.
#5
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93' Del Sol Si H23A1 Project.
And the two day process. Started late, daylight's short so yeah. First off, here's the sol.
Here's the lude, and the funnn Haha.
Okay now, question guys. Do I just loop these two lines? I have no clue wtf they are for.
And last but not least, here's a sneak peak of the seats in the sol.
Here's the lude, and the funnn Haha.
Okay now, question guys. Do I just loop these two lines? I have no clue wtf they are for.
And last but not least, here's a sneak peak of the seats in the sol.
#7
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93' Del Sol Si H23A1 Project.
Haha thanks man, I'm taking parts off the lude today to part **** out. I won't be doing anything else at the moment till my mounts get here which hopefully doesn't take too long.
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93' Del Sol Si H23A1 Project.
It's going to be all motor for a little while so I'll have a running car, But I plan on running like 9psi once I get a kit on er'.
#13
Re: 93' Del Sol Si H23A1 Project.
Just to make sure you know this (I thought about the turbo route with my H22a) but the FRM (Fiber Reinforced Metal) cylinder wall liners are pretty thin, plus you have to think about the fact that they bored out the H22 to end up with the H23. I would definitely suggest getting your engine sleeved even for something as low as 9lbs. I have had many people tell me around 8lbs is what an H22 can hold with stock sleeves. But I do love the H-series swap into the Del Sol! But I am somewhat biased because that's what I have in my Sol. Good luck with the build!
#14
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93' Del Sol Si H23A1 Project.
Haha thanks for the comments guys. Didn't get to log on this morning but this is what Came in the maill. :D
#15
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93' Del Sol Si H23A1 Project.
Just ordered a head, now waiting for that to arrive. Parts are steady selling from the prelude, Time to order axles shortly!
#20
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93' Del Sol Si H23A1 Project.
It has been forever since i've posted pics or any sort of update. I just made a thread about the car not starting, but let me go get those pics!
#21
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93' Del Sol Si H23A1 Project.
EGR Blockoff is here, Thanks to Shawn from Rosko!
Finally cut the hole.
Shift box mocked up.
Alright, it's not much but here's a few pics of ARP Head Studs in, and everything put together. So Excited! Lol.
Finally cut the hole.
Shift box mocked up.
Alright, it's not much but here's a few pics of ARP Head Studs in, and everything put together. So Excited! Lol.
#22
Honda-Tech Member
Thread Starter
Join Date: May 2008
Location: Salisbury, MD, 21804
Posts: 65
Likes: 0
Received 0 Likes
on
0 Posts
Re: 93' Del Sol Si H23A1 Project.
Got the motor all cleaned up and painted, waiting to put my new oil pan on and other valve cover.
Okay guys here's the awaited pics of progress so far!
IAB Blockoff.
IAB Blockoff Painted.
IAB Blockoff Installed.
EGR Blockoff Installed.
Trans Painteddd.
Flywheel and Clutch Installed.
Motor And Trans Mated.
Engine Bay.
And The Motor Is In!!
Okay the other day I finally got the cables ran, biggest pain in the *** ever. It was a hell of a tight fit. I'll have more pics in a few days.
__________________
Okay guys here's the awaited pics of progress so far!
IAB Blockoff.
IAB Blockoff Painted.
IAB Blockoff Installed.
EGR Blockoff Installed.
Trans Painteddd.
Flywheel and Clutch Installed.
Motor And Trans Mated.
Engine Bay.
And The Motor Is In!!
Okay the other day I finally got the cables ran, biggest pain in the *** ever. It was a hell of a tight fit. I'll have more pics in a few days.
__________________
#24
Re: 93' Del Sol Si H23A1 Project.
u keeping the del sol front end or maybe putting the prelude front? ive never seen it done and since u have it already it might look cool. just a thought