92 teg intermediate axle into a B16a2..
#1
Member
Thread Starter
Join Date: Jun 2001
Location: Houston, TX, USA
Posts: 2,082
Likes: 0
Received 0 Likes
on
0 Posts
92 teg intermediate axle into a B16a2..
I recently bought a 99 B16a2 engine, but it did not come with an intermediate shaft. So, I searched the junkyards this weekend and could only come up with a inter. shaft for a 92 teg or B18a. Unfortunately my block is being built at the moment so I am not able to see if the inter. shaft will fit on the back of the block or not. I've been told that all B series inter shafts would work, but still not sure.
This engine will be going into a '00 civic.
My questions:
Will this inter shaft fit the B16a2?
What axles should I use? 92-93 teg axles or will 99-00 B16a2 axles be fine?
If I need to run the 92-93 teg axles, will there be any concerns with fitment into the tranny and the rotors? (too short, too long, etc...)
Thanks
This engine will be going into a '00 civic.
My questions:
Will this inter shaft fit the B16a2?
What axles should I use? 92-93 teg axles or will 99-00 B16a2 axles be fine?
If I need to run the 92-93 teg axles, will there be any concerns with fitment into the tranny and the rotors? (too short, too long, etc...)
Thanks
#2
Re: 92 teg intermediate axle into a B16a2.. (maxim)
Will this inter shaft fit the B16a2?
Yes
What axles should I use?
92-93 teg axles
If I need to run the 92-93 teg axles, will there be any concerns with fitment into the tranny and the rotors?
No
#3
Honda-Tech Member
Join Date: Jun 2002
Location: Los Angeles, CA, USA
Posts: 3,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: 92 teg intermediate axle into a B16a2.. (madtownhonda)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by madtownhonda »</TD></TR><TR><TD CLASS="quote">
Will this inter shaft fit the B16a2?
Yes
What axles should I use?
92-93 teg axles
If I need to run the 92-93 teg axles, will there be any concerns with fitment into the tranny and the rotors?
No
</TD></TR></TABLE>
Nice SN rocket boy!
Will this inter shaft fit the B16a2?
Yes
What axles should I use?
92-93 teg axles
If I need to run the 92-93 teg axles, will there be any concerns with fitment into the tranny and the rotors?
No
</TD></TR></TABLE>
Nice SN rocket boy!
Thread
Thread Starter
Forum
Replies
Last Post
doublethink
Honda CRX / EF Civic (1988 - 1991)
4
06-05-2004 09:15 PM