esoterEK..

Well this question is mainly for my friend he has a H22 type s in his eg and wanted to get a dc ss header but which one the one made for the SH or reg prelude?

HATCHingMN

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EGkwazhimoto &raquo;</TD></TR><TR><TD CLASS="quote">Well this question is mainly for my friend he has a H22 type s in his eg and wanted to get a dc ss header but which one the one made for the SH or reg prelude?</TD></TR></TABLE>
you're missing a H on your type s__(blink)___??!!!
Prelude never made a type S ...only... type SH
So tell your friend to get type SH or the regular H22 VTEC DC!!
He have the DOHC 2.2 vtec right!!

TorganFM

Type S = JDM Strong 220hp
S = USDM Weak 135hp

ATS*Mark

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HATCHingMN &raquo;</TD></TR><TR><TD CLASS="quote">
you're missing a H on your type s__(blink)___??!!!
Prelude never made a type S ...only... type SH
So tell your friend to get type SH or the regular H22 VTEC DC!!
He have the DOHC 2.2 vtec right!!</TD></TR></TABLE>

ya your a dumbass , there is no difference in motors between the prelude and the prelude sh
and the jdm type S prelude has a more powerfull motor

TurboBumblBee

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HATCHingMN &raquo;</TD></TR><TR><TD CLASS="quote">
you're missing a H on your type s__(blink)___??!!!
Prelude never made a type S ...only... type SH
So tell your friend to get type SH or the regular H22 VTEC DC!!
He have the DOHC 2.2 vtec right!!</TD></TR></TABLE>

incorrect.. they made a jdm type-s motor.. i think it was rated at 220

*edit* opps.. somene beat me to it..

H22ek4

tell him not to waste his money on a dc header. the dc header for h22's is not much of an improvement over the stock.

esoterEK..

which header do you guys prefer either way it's going to have custom piping for the exhaust... Just a correction it is a TYPE S it's a jdm motor.

h22John

i recomend, If you have the money...1)SMSP $1200?, 2)Hytech $1300, 3) AN-R or Headertech $600-1000 depending on options......DC is cheap but won't really gain you much..........good luck.......John...........BTW I bought an AN-R header, was 780 shipped h22 header with street collector and stainless...

HATCHingMN

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">

ya your a dumbass , there is no difference in motors between the prelude and the prelude sh
and the jdm type S prelude has a more powerfull motor</TD></TR></TABLE>
WTF...he never mention JDM H22, I thought he was talking about the non-vtec lude!!

h22John

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HATCHingMN &raquo;</TD></TR><TR><TD CLASS="quote">
WTF...he never mention JDM H22, I thought he was talking about the non-vtec lude!!</TD></TR></TABLE>Ahhhhhhhhhhh!!!! But he did say H22. usdm S model came with F22 sohc non-vtec pos......I got one heh

electron-eg

i heard alot about the hotshot headers... supposedly the best for the buck especially since they are only custom made to fit h22 in civic's or crx's....i was thinking of gettig that one myself since i havent heard much about any other headers..

HATCHingMN

Sorry I never deal with H-series B4!! as well a any JDM H22!!

h22John

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HATCHingMN &raquo;</TD></TR><TR><TD CLASS="quote">Sorry I never deal with H-series B4!! as well a any JDM H22!!</TD></TR></TABLE> Well whats the hold up..H motors= fun

HATCHingMN

I have two other car to play with!! My hatch is just a winter beater!! But recently I have thought about turning into a sleeper!! consider I never fully- built a civic before so...this is my chance!!

kingSfit

keep ur stock motor

h22John

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bunz &raquo;</TD></TR><TR><TD CLASS="quote">keep ur stock motor
</TD></TR></TABLE> NOOB!!

ranta18

You might try our headers. They are made for the H22/Civic swap and have show some nice power gains.

slammed_93_hatch

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by h22John &raquo;</TD></TR><TR><TD CLASS="quote">i recomend, If you have the money...1)SMSP $1200?, 2)Hytech $1300, 3) AN-R or Headertech $600-1000 depending on options......DC is cheap but won't really gain you much..........good luck.......John...........BTW I bought an AN-R header, was 780 shipped h22 header with street collector and stainless... </TD></TR></TABLE>

well i know that, header's differ from motor to motor, but in the b series challenge, the DC 4-1 was the best bang for your buck, its not a waste of money at all. it gained more then all of the headers except 2 or 3 i think down low and the top end was the only i difference. search for titian motor sports ultimate header test int he NA forum.


AGAIN im just infuring that if a company builds a header for one motor and you see certian gains then with the same type of header on a different motor you should see similar gains

now i know this isn't true but it is something to go off of

h22John

heh, done read the titan test a while back, very impressive, BUT was'nt that a dc jdm w/ 2.5 in collector?.....I don't think they have an option like that for the h22 unless you wanted to modify it yourself.......and i'm not trying to rag on dc, DC truly does have great bang for the buck, hell my h22 made 185whp with a dc header. he asked for a recomendation, I gave it......John

ranta18

We made 13 hp and 9 ft-lbs over DC Sports on a H22 with only i,h,e and VAFC. Another customer made 17 hp and 12 ft-lbs over a stock manifold with a custom 2.5" collector. I think we offer a very nice bang for the buck.

v4lu3s

a JDM oem header for an h22a outflows a DC header for the h22a.
i would only go with a dc if it was free...

h22John

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ranta18 &raquo;</TD></TR><TR><TD CLASS="quote">We made 13 hp and 9 ft-lbs over DC Sports on a H22 with only i,h,e and VAFC. Another customer made 17 hp and 12 ft-lbs over a stock manifold with a custom 2.5" collector. I think we offer a very nice bang for the buck.</TD></TR></TABLE> Yes you guys make a great header!!!! Totally agree, I just went with an AN-R because a friend of mine has an AN-R and is very happy with it. Plus it was sooooo damn hard to decide with all these great headers coming out.......BTW headertech is great bang for the buck too.. John

civicsitek GanGsTa

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by v4lu3s &raquo;</TD></TR><TR><TD CLASS="quote">a JDM oem header for an h22a outflows a DC header for the h22a.
i would only go with a dc if it was free...</TD></TR></TABLE>

I'd go w/ imagine or an-r if you have a limited budget and dtr if you are a baller.

Simple SOHC

I've been reading alot of post about people buying AN-R headers...but I haven't seen a home page for them...can someone post a link to their site...thnx.

h22John

[URL]http://www.AN-R.com<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by H23[/URL &raquo;</TD></TR><TR><TD CLASS="quote"> EG Hybrid]I've been reading alot of post about people buying AN-R headers...but I haven't seen a home page for them...can someone post a link to their site...thnx.</TD></TR></TABLE>