CSX Type S-Civic Type R Conversion
#26
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Calgary, ALberta, Canada
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
sorry guys still haven't gotten the conversion put on yet. ran into abit of a snag with funds. the house is kinda priority right now with renovations. so all my parts are sitting in the basement collecting dust. I will actually be installing some cusco parts this weekend and will post pics. Also carbon trunk and JDM Type R spoiler end pieces are getting painted this week so i will post pics of that too.
Here are some updated pics taken from our honda meet on May 31/09:
rockin Volk RE30's 18x8.5 w/245/35/18's all the way around
hhhmmm MUGEN
Here are some updated pics taken from our honda meet on May 31/09:
rockin Volk RE30's 18x8.5 w/245/35/18's all the way around
hhhmmm MUGEN
Last edited by TypeR_Turbo; 06-05-2009 at 02:37 PM.
#31
#32
Honda-Tech Member
Join Date: Dec 2007
Location: San Diego, california, Best Coast
Posts: 1,762
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
Volk RE30's are my favorite.
Damn I wished I was crapping money.
Wish you best with your build.
Damn I wished I was crapping money.
Wish you best with your build.
#33
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Calgary, ALberta, Canada
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
so here are some updated parts that i have done to the car.
Seibon Carbon Trunk Lid
OEM Civic Type R Spoiler
What a pain in the *** this spoiler and trunk was putting together and drilling holes for the spoiler and the taillights.
Also added a Cusco rear upper strut bar
Seibon Carbon Trunk Lid
OEM Civic Type R Spoiler
What a pain in the *** this spoiler and trunk was putting together and drilling holes for the spoiler and the taillights.
Also added a Cusco rear upper strut bar
#35
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Calgary, ALberta, Canada
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
installed a couple interior pieces:
OEM JDM CTR Push Button Start
OEM JDM CTR Push Button Start Panel
OEM JDM CTR Hazard Button
stock buttons
install process had to make my own harness for the push start button and integrate a relay
and the final product
push start button works great, i can start the car just like stock or with the start button. I have to find out how to make it so i have to use the button all the time.
OEM JDM CTR Push Button Start
OEM JDM CTR Push Button Start Panel
OEM JDM CTR Hazard Button
stock buttons
install process had to make my own harness for the push start button and integrate a relay
and the final product
push start button works great, i can start the car just like stock or with the start button. I have to find out how to make it so i have to use the button all the time.
#37
Honda-Tech Member
Re: CSX Type S-Civic Type R Conversion
Splice yellow ignition wire = button start and key start
I had the S2K push start button installed on my FG1, I T-tapped it, just in case the switch goes out.
Last edited by av911; 08-03-2009 at 10:59 PM.
#38
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Calgary, ALberta, Canada
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
thank you
thanks for the tip. i'll unplug it and just pull the pin out of the plug instead of cutting it.
added a couple more suspension upgrades
Cusco 3pt Rear Lower Tie Bar
Cusco 23mm Rear Sway Bar & Bushings
this is what it looks like underneath with the cover on, shitty cause nobody will see the lower tie bar after i put it on anyways
added a couple more suspension upgrades
Cusco 3pt Rear Lower Tie Bar
Cusco 23mm Rear Sway Bar & Bushings
this is what it looks like underneath with the cover on, shitty cause nobody will see the lower tie bar after i put it on anyways
#41
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Calgary, ALberta, Canada
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
#44
Honda-Tech Member
Thread Starter
Join Date: Feb 2003
Location: Calgary, ALberta, Canada
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
so i decided to add some monkey bars to the car 8 bars to be exact :nut:
Cusco Front Member Bar (1pce)
Cusco Floor Front Side Bars (2pce)
Cusco Floor Center Bars (3pce)
Cusco Floor Rear Side Bars (2pce)
So here is what it looked like stock with all the covers on.
front floor side bars
rear floor side bars
and all of them installed
Cusco Front Member Bar (1pce)
Cusco Floor Front Side Bars (2pce)
Cusco Floor Center Bars (3pce)
Cusco Floor Rear Side Bars (2pce)
So here is what it looked like stock with all the covers on.
front floor side bars
rear floor side bars
and all of them installed
#48
Junior Member
Join Date: Sep 2006
Location: Bakersfield, CA, USA
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
installed a couple interior pieces:
OEM JDM CTR Push Button Start
OEM JDM CTR Push Button Start Panel
OEM JDM CTR Hazard Button
stock buttons
install process had to make my own harness for the push start button and integrate a relay
and the final product
push start button works great, i can start the car just like stock or with the start button. I have to find out how to make it so i have to use the button all the time.
OEM JDM CTR Push Button Start
OEM JDM CTR Push Button Start Panel
OEM JDM CTR Hazard Button
stock buttons
install process had to make my own harness for the push start button and integrate a relay
and the final product
push start button works great, i can start the car just like stock or with the start button. I have to find out how to make it so i have to use the button all the time.
#49
Honda-Tech Member
#50
Junior Member
Join Date: Sep 2006
Location: Bakersfield, CA, USA
Posts: 425
Likes: 0
Received 0 Likes
on
0 Posts
Re: CSX Type S-Civic Type R Conversion
I would still like some response to my post tho.