SHARE YOUR STANCE - The guide to achieving that ideal setup...
04-06-2012, 03:43 PM
#726
Honda-Tech Member
Join Date: Feb 2010
Location: Soeast
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
A temp set-up until I buy a sheet of steel. Basically will then be used as a template for the new jank.
04-06-2012, 04:34 PM
#727
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
Nice! i want a skid plate for my DB!
Wheels: XXR 501
Specs (i.e. size, width, offsets): 16X8
Tire specs: 195/45/16
Suspension setup:F&F Type 1's
Camber specs: Stock
Jack Point Measurement (from ground): 2 1/2 inches
Additional comments about your setup: Fenders are rolled all around and a slight pull aswell
Overall rating of your setup (1-10): 9, it rubs a little during a full turn. F&F rides smooth!
Wheels: XXR 501
Specs (i.e. size, width, offsets): 16X8
Tire specs: 195/45/16
Suspension setup:F&F Type 1's
Camber specs: Stock
Jack Point Measurement (from ground): 2 1/2 inches
Additional comments about your setup: Fenders are rolled all around and a slight pull aswell
Overall rating of your setup (1-10): 9, it rubs a little during a full turn. F&F rides smooth!
04-06-2012, 07:37 PM
#728
Honda-Tech Member
Join Date: Apr 2012
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
Wheels: Enkei 92
Specs (i.e. size, width, offsets): 15X8, 25 offset
Tire specs: 195/50/15 falken
Suspension setup: tokico whites/groundcontrol/top hats
Camber specs: ??
Jack Point Measurement (from ground): ??
Additional comments about your setup: fenders rolled
Overall rating of your setup (1-10): 7, rides super smooth
rubs the frenders going up driveway curbs
Specs (i.e. size, width, offsets): 15X8, 25 offset
Tire specs: 195/50/15 falken
Suspension setup: tokico whites/groundcontrol/top hats
Camber specs: ??
Jack Point Measurement (from ground): ??
Additional comments about your setup: fenders rolled
Overall rating of your setup (1-10): 7, rides super smooth
rubs the frenders going up driveway curbs
04-06-2012, 11:28 PM
#730
Honda-Tech Member
Join Date: Apr 2012
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
my 93 civic eg 4dr
Wheels: ESM 003's
Specs (i.e. size, width, offsets): 17x8.5 +25 all around
Tire specs: 205/40/17
Suspension setup: skunk2 coilovers, tokico 5 ways, full skunk camber kit
Camber specs: ono
Jack Point Measurement (from ground): havent measured it
Additional comments: Just put these wheels on today,,so havent had a chance to tweek the suspension yet.....my inner fender lips are rolled flat
Overall rating of your setup (1-10): 8
Wheels: ESM 003's
Specs (i.e. size, width, offsets): 17x8.5 +25 all around
Tire specs: 205/40/17
Suspension setup: skunk2 coilovers, tokico 5 ways, full skunk camber kit
Camber specs: ono
Jack Point Measurement (from ground): havent measured it
Additional comments: Just put these wheels on today,,so havent had a chance to tweek the suspension yet.....my inner fender lips are rolled flat
Overall rating of your setup (1-10): 8
Last edited by toyomatt84; 04-07-2012 at 07:49 AM. Reason: Removed images from quote.
04-16-2012, 07:42 PM
#732
Honda-Tech Member
Join Date: Oct 2009
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
Wheels: honda spares
Specs: 15x8 + 13/10 and also 5mm spacers
Tire specs: 195/45/15 Toyo Proxes T1r
Suspension setup: Ground Control/Koni Yellow/Top Hats
Camber specs: NO camber kit but camber is somewhere around -4
Additional comments about your setup: rides alright being at this height, have driven all over Tennessee at this height as well with no problems
Specs: 15x8 + 13/10 and also 5mm spacers
Tire specs: 195/45/15 Toyo Proxes T1r
Suspension setup: Ground Control/Koni Yellow/Top Hats
Camber specs: NO camber kit but camber is somewhere around -4
Additional comments about your setup: rides alright being at this height, have driven all over Tennessee at this height as well with no problems
Last edited by toyomatt84; 04-16-2012 at 09:14 PM. Reason: Removed images from quote.
04-17-2012, 12:19 AM
#733
Honda-Tech Member
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
Hi There!
My EM-1
Below Enjoy & Sorry for the shitty Pics.
Wheels: 15 Enkei RS - pcd 100 x 4 - 6.5jj - offset 32
Tire specs: 205/50-15 Sumitomo HTR 200
Suspension setup: TEIN Super Street Damper
Camber specs: natural (stock)
Need @ fresh paint wire tuck & Wheels lots off work new update will bee Coming Soon.
My EM-1
Below Enjoy & Sorry for the shitty Pics.
Wheels: 15 Enkei RS - pcd 100 x 4 - 6.5jj - offset 32
Tire specs: 205/50-15 Sumitomo HTR 200
Suspension setup: TEIN Super Street Damper
Camber specs: natural (stock)
Need @ fresh paint wire tuck & Wheels lots off work new update will bee Coming Soon.
04-18-2012, 06:54 PM
#734
Honda-Tech Member
Join Date: Feb 2009
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
What would be the best setup for a moderatly lowered ride but still comfortable?
I got a 91 civic si with D2 adjustable coilovers i got in a trade with some local dude. I really don't like them and think they might be going out so I'm looking to replace them with the best affordable brand.
I got a 91 civic si with D2 adjustable coilovers i got in a trade with some local dude. I really don't like them and think they might be going out so I'm looking to replace them with the best affordable brand.
04-18-2012, 07:09 PM
#735
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
What would be the best setup for a moderatly lowered ride but still comfortable?
I got a 91 civic si with D2 adjustable coilovers i got in a trade with some local dude. I really don't like them and think they might be going out so I'm looking to replace them with the best affordable brand.
I got a 91 civic si with D2 adjustable coilovers i got in a trade with some local dude. I really don't like them and think they might be going out so I'm looking to replace them with the best affordable brand.
04-19-2012, 02:44 PM
#736
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
Wheels: Varrstoen
Specs (i.e. size, width, offsets): 17x9 +30
Tire specs: 235/40/17 Dunlop Star Specs
Suspension setup: BC
Camber specs: -2F, -3R
Jack Point Measurement (from ground): high enough to fit a low pro-jack?
Additional comments about your setup: I want 245's
Specs (i.e. size, width, offsets): 17x9 +30
Tire specs: 235/40/17 Dunlop Star Specs
Suspension setup: BC
Camber specs: -2F, -3R
Jack Point Measurement (from ground): high enough to fit a low pro-jack?
Additional comments about your setup: I want 245's
04-27-2012, 06:58 AM
#741
Honda-Tech Member
Join Date: Aug 2010
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
I just want to know if i put bbs rs 16x8.5+20 all around on my integra dc2 with rolling fe ders and tein ss suspension thanks for help
04-27-2012, 09:20 AM
#742
Honda-Tech Member
Join Date: Nov 2011
Location: Canada
Posts: 196
Likes: 0
Received 0 Likes
on
0 Posts
05-09-2012, 08:13 AM
#743
Honda-Tech Member
Join Date: Apr 2008
Location: sioux falls, sd, minnehaha
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
im wondering if you guys could help me out i have my work meister they are 15x6.5 and 15x7 and i have a 00 si with function and form type 2 and im trying to make it sit right with tires and i dont know what to go with i want it to have just a little strech so i can have it just stanced a little bit if anyone could help me out that would be great thanks
05-09-2012, 08:18 AM
#744
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
Not knowing who Donut is 
Not sure what you're asking really. 6.5" wide wheels will never be "stanced". You can run spacers and push them out into the fenders, but you don't need to stretch tires or roll fenders because those wheels actually fit the car.
im wondering if you guys could help me out i have my work meister they are 15x6.5 and 15x7 and i have a 00 si with function and form type 2 and im trying to make it sit right with tires and i dont know what to go with i want it to have just a little strech so i can have it just stanced a little bit if anyone could help me out that would be great thanks
05-09-2012, 08:41 AM
#745
Honda-Tech Member
Join Date: Apr 2008
Location: sioux falls, sd, minnehaha
Posts: 213
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
im just having trouble seeing what size of tires i need to go with and spacer size
05-09-2012, 10:14 AM
#746
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
So many people in this thread have done so much research and various setup's to find optimal stretch/ poke/ flush and they're understandably mum when it comes to sharing it. Read through all the pages and look at other 96-00 Civic's and they're setups and decide what you like. When your done check out this site.
05-09-2012, 12:42 PM
#750
Honda-Tech Member
Join Date: Aug 2011
Location: Ballston Spa NY
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Re: SHARE YOUR STANCE - The guide to achieving that ideal setup...
Wheels: Enkei J Speed Classic
Specs (i.e. size, width, offsets): 15X8, +38
Tire specs: 205/50/15 Falken Ziex
Suspension setup: Koni Reds/Vogtland springs
Camber specs: ??
Jack Point Measurement (from ground): ??
Additional comments about your setup: Also is a set of 949 6UL 15X8s with a 205/50 Nitto Neogen tire set.
Specs (i.e. size, width, offsets): 15X8, +38
Tire specs: 205/50/15 Falken Ziex
Suspension setup: Koni Reds/Vogtland springs
Camber specs: ??
Jack Point Measurement (from ground): ??
Additional comments about your setup: Also is a set of 949 6UL 15X8s with a 205/50 Nitto Neogen tire set.