Post up your Desmond Regamaster wheels!
#3654
Anti-GDD White Knight Simp
#3655
Don't judge or question
iTrader: (40)
Re: Post up your Desmond Regamaster wheels!
Here is what I can see just from that picture.
1. VIA JWL stamp is on the wrong spoke, it should be to the right of the valve stem.
2. The groove in the spoke doesn't go far enough, it should go closer to the barrel.
3. The edge of the lip is too flat, it should be slightly rounded.
4. There is a groove on the back of the barrel which the real wheels do not have.
#3656
Anti-GDD White Knight Simp
Re: Post up your Desmond Regamaster wheels!
I should have known from the groove on the barrel, that does look off now that you mention it. Didn't know that about the stamps
#3664
Re: Post up your Desmond Regamaster wheels!
Wtb:
A single original white 4x100 +35offset 15x6.5 regamaster evo.
Or a pair of 15x7 4x100.. if not, a pair of 15x6.5 +35 original white. Please pm me
A single original white 4x100 +35offset 15x6.5 regamaster evo.
Or a pair of 15x7 4x100.. if not, a pair of 15x6.5 +35 original white. Please pm me
#3670
Re: Post up your Desmond Regamaster wheels!
They are most likely slipstreams, they make pretty good replicas but if you know what to look for they are easy to spot. I hope he knows they are fake and didn't pay thinking they are real.
Here is what I can see just from that picture.
1. VIA JWL stamp is on the wrong spoke, it should be to the right of the valve stem.
2. The groove in the spoke doesn't go far enough, it should go closer to the barrel.
3. The edge of the lip is too flat, it should be slightly rounded.
4. There is a groove on the back of the barrel which the real wheels do not have.
Here is what I can see just from that picture.
1. VIA JWL stamp is on the wrong spoke, it should be to the right of the valve stem.
2. The groove in the spoke doesn't go far enough, it should go closer to the barrel.
3. The edge of the lip is too flat, it should be slightly rounded.
4. There is a groove on the back of the barrel which the real wheels do not have.
Thread
Thread Starter
Forum
Replies
Last Post