"hella flush" people, help me out.
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Oct 2011
Location: Phoenix, Arizona
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
"hella flush" people, help me out.
I'm trying to flush my car out more, but I have a hard time understanding how you guys get the front flushed so well without rubbing during turns. My rears are flushed pretty well, but only because they don't have to move. So how do you guys flush your front ends without them rubbing?
#3
Honda-Tech Member
#5
Honda-Tech Member
Re: "hella flush" people, help me out.
Here let me help you!
Push IT off a cliff, should BE PRETTY HELLAFLUSH after that.
YOUR POST was actually more HELPFUL
To the OP, my best opinion would be putting in work on those front fenders(Rolling/Pulling). Also adding some negative camber.
Push IT off a cliff, should BE PRETTY HELLAFLUSH after that.
YOUR POST was actually more HELPFUL
To the OP, my best opinion would be putting in work on those front fenders(Rolling/Pulling). Also adding some negative camber.
#6
Honda-Tech Member
Re: "hella flush" people, help me out.
If you notice, most "hella flush" cars have f*cked up fenders and have to turn very slowly due to the fact that the front wheels smash in to the fender if they turn too sharp.
Save yourself the trouble and keep it how it is now.
Examples of hellaflush front wheels gone bad.
Save yourself the trouble and keep it how it is now.
Examples of hellaflush front wheels gone bad.
Last edited by WhiteSlips; 06-27-2012 at 01:22 PM.
Trending Topics
#10
Honda-Tech Member
Re: "hella flush" people, help me out.
I misspeeled on the eenternets.
I'm sory
#15
Honda-Tech Member
Re: "hella flush" people, help me out.
If you're responding to me talking about what either looks like a Miata or S2K. I was referring to its fitment, not the actual car. But either way enjoy your homosexual miata
Thread
Thread Starter
Forum
Replies
Last Post