First SLR shots of the lude.... JDM 2.0Si 4WS
#26
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: van, bc, Canada
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Re: (WanganRunner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WanganRunner »</TD></TR><TR><TD CLASS="quote">That's the nicest BB1 Prelude I've ever seen in my life.
Those care are woefully underappreciated. Beautiful cars, IMO.</TD></TR></TABLE>
It's actually a BA5, but thanks for the compliments
All North American 3rd gen Preludes are BA4, as well as international non-4WS models. 4WS models are BA5 in Japan and some other places (I don't know all of them).
BB1 is a 4th gen prelude (92-96 chassis code), like my other car, 95 Prelude SRV (vtec model).
Those care are woefully underappreciated. Beautiful cars, IMO.</TD></TR></TABLE>
It's actually a BA5, but thanks for the compliments
All North American 3rd gen Preludes are BA4, as well as international non-4WS models. 4WS models are BA5 in Japan and some other places (I don't know all of them).
BB1 is a 4th gen prelude (92-96 chassis code), like my other car, 95 Prelude SRV (vtec model).
#32
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: van, bc, Canada
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Re: (JDM knowledge)
Thanks for the compliments everyone
Here is my list of mods for those interested:
Engine (2L b20a):
Custom 94-01 Integra CAI w/ BPi Flowstack & K&N filter
2.25" Catback exhaust with Apexi WS2 Muffler
Battery Relocated to Trunk w/ 2 gauge wire
Powder Coated Semi-gloss Black front strut bar & valve cover
Suspension & Brakes:
Neuspeed Race Springs
Tokico Blues Struts
Ingalls Camber Kit F + R
Custom STB's F + R
SuperPro Poly UCA Bushings
Custom Endlinks w/ Poly Bushings
Brembo blank rotors & AEM pads
Goodridge SS Braided brake lines
Exterior:
Honda Accord Mugen Replica Front Lip
94-95 Accord OEM Side Skirts & 3-piece Rear Lip
17" bronze Work Emotion CR w/ Kumho Ecsta MX
Gemini Composites Carbon Fiber Hood
Custom Heated Mirrors
EDM center taillight w/ rear foglights
Shaved PRELUDE lettering from taillight
OEM Prelude Window Visors
Interior:
Custom Short Shifter
JDM Stainless Door Sills (Honda Access)
HKB Steering Boss w/ Cruise buttons & Nardi Wheel
Skunk2 Shift ****
Honda CTR Shift Boot
Custom INX Gauge Rings
RHD A-Pillar Gauge Pod (Autometer Oil Pressure & Water Temp)
RHD UK Non-Slip Rubber Dash Mat (Honda Access)
OEM Black Armrest
Some older random pics
Here is my list of mods for those interested:
Engine (2L b20a):
Custom 94-01 Integra CAI w/ BPi Flowstack & K&N filter
2.25" Catback exhaust with Apexi WS2 Muffler
Battery Relocated to Trunk w/ 2 gauge wire
Powder Coated Semi-gloss Black front strut bar & valve cover
Suspension & Brakes:
Neuspeed Race Springs
Tokico Blues Struts
Ingalls Camber Kit F + R
Custom STB's F + R
SuperPro Poly UCA Bushings
Custom Endlinks w/ Poly Bushings
Brembo blank rotors & AEM pads
Goodridge SS Braided brake lines
Exterior:
Honda Accord Mugen Replica Front Lip
94-95 Accord OEM Side Skirts & 3-piece Rear Lip
17" bronze Work Emotion CR w/ Kumho Ecsta MX
Gemini Composites Carbon Fiber Hood
Custom Heated Mirrors
EDM center taillight w/ rear foglights
Shaved PRELUDE lettering from taillight
OEM Prelude Window Visors
Interior:
Custom Short Shifter
JDM Stainless Door Sills (Honda Access)
HKB Steering Boss w/ Cruise buttons & Nardi Wheel
Skunk2 Shift ****
Honda CTR Shift Boot
Custom INX Gauge Rings
RHD A-Pillar Gauge Pod (Autometer Oil Pressure & Water Temp)
RHD UK Non-Slip Rubber Dash Mat (Honda Access)
OEM Black Armrest
Some older random pics
#40
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: van, bc, Canada
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Tight R)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tight R »</TD></TR><TR><TD CLASS="quote">how much did this car cost ya to buy? and was it stock when you got it? if you dont mind me asking.
these cars are hard to come by even in japan your one of the lucky few.</TD></TR></TABLE>
It cost me $6000 Canadian $ all said and done. It was bone stock when I got it in 2005, with 70,000 km on it. I've had to do no major maintenance to it, and it's my daily.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Riced-EL »</TD></TR><TR><TD CLASS="quote">Is your car Auto or stick? Cause i've seen a few 4WS, before and never have I seen 1 built in stick before.</TD></TR></TABLE>
It's a 5 speed. It took my almost a month to find a 5 speed model through the auctions in Japan, 95% of the ones I was looking at were auto.
I will take an interior shot later tonight.
And for Tight R, here is a couple shots of the car when I first picked it up
these cars are hard to come by even in japan your one of the lucky few.</TD></TR></TABLE>
It cost me $6000 Canadian $ all said and done. It was bone stock when I got it in 2005, with 70,000 km on it. I've had to do no major maintenance to it, and it's my daily.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Riced-EL »</TD></TR><TR><TD CLASS="quote">Is your car Auto or stick? Cause i've seen a few 4WS, before and never have I seen 1 built in stick before.</TD></TR></TABLE>
It's a 5 speed. It took my almost a month to find a 5 speed model through the auctions in Japan, 95% of the ones I was looking at were auto.
I will take an interior shot later tonight.
And for Tight R, here is a couple shots of the car when I first picked it up
#43
Honda-Tech Member
Re: First SLR shots of the lude.... JDM 2.0Si 4WS (BLANCOh22a4)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BLANCOh22a4 »</TD></TR><TR><TD CLASS="quote">awesome </TD></TR></TABLE>
#44
Honda-Tech Member
Re: First SLR shots of the lude.... JDM 2.0Si 4WS (esoterEK..)
i don't think i've ever seen an 88' lude that's not run down or beat up. that sucker looks great dood
#47
Honda-Tech Member
Thread Starter
Join Date: May 2005
Location: van, bc, Canada
Posts: 333
Likes: 0
Received 0 Likes
on
0 Posts
Re: (MUlrich07)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by MUlrich07 »</TD></TR><TR><TD CLASS="quote">i like how you're doing like, 80 mph (states) 4k in 5th gear? lol. sick car brother, see you on pp.com.</TD></TR></TABLE>
I think I might have been in 4th, or does 4k in 5th sound normal? I've never really paid attention.
I think I might have been in 4th, or does 4k in 5th sound normal? I've never really paid attention.