Do iT yourself short shifter mod *done*
08-02-2002, 02:14 PM
#1
Honda-Tech Member
Thread Starter
Do iT yourself short shifter mod *done*
hey i just did a do it yourself project i found on another .com.
the pictures are here http://www.ntpog.org/mods/fifth-****/****.shtml
if you have already seen\done this then
but it was real easy and i highly recommend doing it. any questions, please ask.
-chris B
the pictures are here http://www.ntpog.org/mods/fifth-****/****.shtml
if you have already seen\done this then
but it was real easy and i highly recommend doing it. any questions, please ask.-chris B
08-02-2002, 11:07 PM
#3
Honda-Tech Member
Thread Starter
Re: Do iT yourself short shifter mod *done* (zidek_accord)
i got the three dies special ordered from local hardware store and they were about 5 bucs a piece and the die holder with the handles (t bar) was 9 bucs.
08-03-2002, 12:17 AM
#4
Junior Member
Join Date: Jan 2001
Location: Tampa,FL Tuscaloosa for college, USA
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do iT yourself short shifter mod *done* (Beach Accord)
looks good man, can't wait to check it out in a few days, when i come back to tampa. wish i could have done that instead for my car.
08-08-2002, 05:55 PM
#5
Banned
Join Date: Sep 2001
Location: Long Island / NYC, NY, USA
Posts: 316
Likes: 0
Received 0 Likes
on
0 Posts
Re: Do iT yourself short shifter mod *done* (Comptech98GSR)
K Thanks to beach accord for IMing me and giving me more info on this... I went ahead today and shortened my shifter too. God I think i'm addicted to high speed cutting with a Dremel now... who would've guessed spinning at 35,000 RPM can do so much for you? =P OK the only problem I ran into was unable to find the Dies measured with metric system. So now the thread on my shifter is kind of messed up, but I'm going to look around and fix it later.
Thanks again dude!
Thanks again dude!
Thread
Thread Starter
Forum
Replies
Last Post
