93 Accord LX with 90 prelude seats install.
09-16-2010, 02:21 PM
#1
Honda-Tech Member
Thread Starter
93 Accord LX with 90 prelude seats install.
90 Prelude seats installed into 90-97 Accord
These seats are much more comfortable and more supportive in hard cornering.
More pics will be coming after I do the passenger side. My camera ate some of the pics.
Step 1.
Strip the Accord seat rails until they are flat. You will have to drill out a lot of spot welds.
Step 2.
Strip the prelude seats, except the reclining mechanism.
Step 3.
Make these two parts from 1/8" flat steel.
Step 4.
Weld to the right seat slider. Do this while the rails are bolted in.
The hole in the part I made is for the seat belt bolt and to reinforce the Swiss cheese.
These seats are much more comfortable and more supportive in hard cornering.
More pics will be coming after I do the passenger side. My camera ate some of the pics.
Step 1.
Strip the Accord seat rails until they are flat. You will have to drill out a lot of spot welds.
Step 2.
Strip the prelude seats, except the reclining mechanism.
Step 3.
Make these two parts from 1/8" flat steel.
Step 4.
Weld to the right seat slider. Do this while the rails are bolted in.
The hole in the part I made is for the seat belt bolt and to reinforce the Swiss cheese.
Last edited by uberEFtuner; 09-16-2010 at 03:03 PM.
Thread
Thread Starter
Forum
Replies
Last Post
BoostedH23a1
Honda Accord (1990 - 2002)
19
11-13-2002 04:58 PM
