hes down GMZ's Ek9

 

going to work on getting the '06 si seats mounted today just in time for the swapage

neema's car is sooooo nice - TOO BAD HE DOESN'T KNOW HOW TO DRIVE IT

driving > ekizzle

 

naw hes a good driver . his car is just plain slow.

 

lol

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">naw hes a good driver . his car is just plain slow.</TD></TR></TABLE>

lol
one of these days neema is gunna smash you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS.fred &raquo;</TD></TR><TR><TD CLASS="quote">

lol
one of these days neema is gunna smash you </TD></TR></TABLE>

if he can get it in 3rd gear

DOES ANYONE KNOW WHERE STEVE TAYLOR IS AT RIGHT NOW....YES TECH43 STEVE???????

 

check my kicks yo

 

effin bored at homeeeee



inside shot

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">

i know , i wanna know how he did that with the takatas . it doesnt look like its set up to mount on a harness bar.....</TD></TR></TABLE>

That bar you have is made to route the harness straps over. You're right though, that bar isn't made to attach the straps to.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by adirondackR &raquo;</TD></TR><TR><TD CLASS="quote">
DOES ANYONE KNOW WHERE STEVE TAYLOR IS AT RIGHT NOW....YES TECH43 STEVE???????</TD></TR></TABLE>

Somewhere lagging on someones engine like always....somewhere in Torrance.

 

heres some info on mounting takatas for everyone curious...





heres the link...
http://www.takataracingproducts.com/guide.html

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mr. Bob Dobalina &raquo;</TD></TR><TR><TD CLASS="quote">

Somewhere lagging on someones engine like always....somewhere in Torrance.</TD></TR></TABLE>

nope... I have a nice clean jdm k20a here in NY

steve was supposed to trailer an ek with a K20a (mounted with ekk1 mounts) to John @ hytech so John can fit my header, T1R midpipe & hytech twinloop w/Karcepts shift kit do to clearance issues with shiftkit & header exh....spending all that $ on the exhuast - i didn't want it hacked up & wanted John to do it right
BTW john@hytech has all my parts except the t1r midpipe which steve has (thanks GARTH)

EDIT - just spent a couple hours working on design for custom brackets to mount the FG2 ('06 si) seats


Modified by adirondackR at 6:04 PM 3/22/2006

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">

negative . the harnesses should be mounted to the harness bar , not routed over like mine and yours.</TD></TR></TABLE>

actually his are mounted correctly. As long as you have a bar directly behind the seat that is close to even with the loops through the seat then it doesnt matter where you mount them. Obviously the more parallel to the loops in the seat the better though.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS.fred &raquo;</TD></TR><TR><TD CLASS="quote">lol
one of these days neema is gunna smash you </TD></TR></TABLE><TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ATS.fred &raquo;</TD></TR><TR><TD CLASS="quote">lol
one of these days neema is gunna smash you </TD></TR></TABLE>
nemo knows i love him!!! i just like talkin shizzle. i would like to race him tho to see how the different powerbands work against each other.

 

I NEED SOMEONE WITH K20A EK W/EKK1 MOUNTS TO GO TO HYTECH IN IRVINE - WILL PAY MONEY!!!!!!
edit - can't do **** from New York

 

edit - thanks for the help hella


Modified by adirondackR at 7:20 PM 3/22/2006

 

sorry . i dont have a k20, nor k20 mounts , i dont even have my car right now. dont have time to drive 7 hours to irvine . dont have the time to leave my car there , then drive the 7 hours back.....

 

anyone else surprized kizzle doesnt have a broadway? I thought all the tite ridez had a broadway y0. Hell, even my girlfriend has one in her accord lol

 

the new shoes look good brian

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by cre18 &raquo;</TD></TR><TR><TD CLASS="quote">the new shoes look good brian </TD></TR></TABLE>

 

i was test fitting my turbo and manifold, but my radiator fan gets in the way. anyone have any suggestions? i think it might clear if i take the radiator off put the turbo on then reinstall the radiator but im not sure, anyone have any ideas?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spoonspeed &raquo;</TD></TR><TR><TD CLASS="quote">i was test fitting my turbo and manifold, but my radiator fan gets in the way. anyone have any suggestions? i think it might clear if i take the radiator off put the turbo on then reinstall the radiator but im not sure, anyone have any ideas?
</TD></TR></TABLE>

slim fan...or trim it.

 

thats a slim fan on ther already . put the fan in front of the radiator as a pusher.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">thats a slim fan on ther already . put the fan in front of the radiator as a pusher.</TD></TR></TABLE>

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">thats a slim fan on ther already . put the fan in front of the radiator as a pusher.</TD></TR></TABLE>
Could not have said that any better