Mugen Thread
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4F_ Mugen CoL »</TD></TR><TR><TD CLASS="quote">less talk, more mugen, ban all of you
</TD></TR></TABLE>
especially Rhett. Who should be punted in the ntus for committing this travesty.
</TD></TR></TABLE>especially Rhett. Who should be punted in the ntus for committing this travesty.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Crank »</TD></TR><TR><TD CLASS="quote">
ask and you shall receive
</TD></TR></TABLE>
clean
ask and you shall receive
</TD></TR></TABLE>clean
Honda-Tech Member
Joined: May 2007
Posts: 3,560
Likes: 1
From: Mashing in the big chainring in LOS ANGELES, CA
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hater »</TD></TR><TR><TD CLASS="quote">Are the centers of 15" MR5's larger in diameter than the centers of 15" MR5 anniversaries?</TD></TR></TABLE>
YES, they are.
The 20th Anniversary and Final Version MR-5 both use the face of a regular 14" MR-5, but have a bolt where there would normally be the valve stem (The valve stem exits out of the lip of the wheel on the Anniversary/Final). The regular 15" MR-5 centers are larger.
You can see here:
YES, they are.
The 20th Anniversary and Final Version MR-5 both use the face of a regular 14" MR-5, but have a bolt where there would normally be the valve stem (The valve stem exits out of the lip of the wheel on the Anniversary/Final). The regular 15" MR-5 centers are larger.
You can see here:
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Akiraboy »</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>
This isn't my picture but I saved it a while back & rehosted it.

Not sure if it helps but I'm going to check some pics that Hung posted in the Mugen brochure thread to see if this pops up, in fact there used to be a pic of this very same motor on the old old SOHC honda site, Bone would know.
lol, Regie is 34?
Damn I'm older than that

</TD></TR></TABLE>This isn't my picture but I saved it a while back & rehosted it.

Not sure if it helps but I'm going to check some pics that Hung posted in the Mugen brochure thread to see if this pops up, in fact there used to be a pic of this very same motor on the old old SOHC honda site, Bone would know.
lol, Regie is 34?
Damn I'm older than that
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGe. »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
That wood wheel and **** combo are ILL.
</TD></TR></TABLE>That wood wheel and **** combo are ILL.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGe. »</TD></TR><TR><TD CLASS="quote">YES, they are.
The 20th Anniversary and Final Version MR-5 both use the face of a regular 14" MR-5, but have a bolt where there would normally be the valve stem (The valve stem exits out of the lip of the wheel on the Anniversary/Final). The regular 15" MR-5 centers are larger.</TD></TR></TABLE>
That's what I thought, and exactly the info I needed.
I know Vega had some info on the anniversaries a while back, but what was up with the yellow/blue again? Like some blue's were yellow underneath or vice versa?
The 20th Anniversary and Final Version MR-5 both use the face of a regular 14" MR-5, but have a bolt where there would normally be the valve stem (The valve stem exits out of the lip of the wheel on the Anniversary/Final). The regular 15" MR-5 centers are larger.</TD></TR></TABLE>
That's what I thought, and exactly the info I needed.
I know Vega had some info on the anniversaries a while back, but what was up with the yellow/blue again? Like some blue's were yellow underneath or vice versa?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nathanong87 »</TD></TR><TR><TD CLASS="quote">gunmetal maybe?</TD></TR></TABLE>still if it is i've never seen them. I would like to see/own a set of these.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brice.Hayden »</TD></TR><TR><TD CLASS="quote">Does that catalog show a "greenish" color of the Final Versions??? How come i've never seen them before????</TD></TR></TABLE>
By greenish do you mean bluish, and by final do you mean anniversary?
By greenish do you mean bluish, and by final do you mean anniversary?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kNOwLedGe. »</TD></TR><TR><TD CLASS="quote">
YES, they are.
The 20th Anniversary and Final Version MR-5 both use the face of a regular 14" MR-5, but have a bolt where there would normally be the valve stem (The valve stem exits out of the lip of the wheel on the Anniversary/Final). The regular 15" MR-5 centers are larger.
You can see here:
[img]https://img257.imageshack.us/img257/318/31yu2.jpg[img]</TD></TR></TABLE>
thanks for clearing that up. I could have sworn I thought I saw center caps
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hater »</TD></TR><TR><TD CLASS="quote">
That's what I thought, and exactly the info I needed.
I know Vega had some info on the anniversaries a while back, but what was up with the yellow/blue again? Like some blue's were yellow underneath or vice versa? </TD></TR></TABLE>
thats a case by case thing. Just depends on who the previous owner was.
I have seen purple anodized Final Versions mr5s before. Those could have been either Finals or 20th redone.
And for some reason I have never seen a brochure and a picture in a brochure of the 20th anniversaies editions
I can't find the other pictures of all of them in my hard drive

YES, they are.
The 20th Anniversary and Final Version MR-5 both use the face of a regular 14" MR-5, but have a bolt where there would normally be the valve stem (The valve stem exits out of the lip of the wheel on the Anniversary/Final). The regular 15" MR-5 centers are larger.
You can see here:
[img]https://img257.imageshack.us/img257/318/31yu2.jpg[img]</TD></TR></TABLE>
thanks for clearing that up. I could have sworn I thought I saw center caps

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hater »</TD></TR><TR><TD CLASS="quote">
That's what I thought, and exactly the info I needed.
I know Vega had some info on the anniversaries a while back, but what was up with the yellow/blue again? Like some blue's were yellow underneath or vice versa? </TD></TR></TABLE>
thats a case by case thing. Just depends on who the previous owner was.
I have seen purple anodized Final Versions mr5s before. Those could have been either Finals or 20th redone.
And for some reason I have never seen a brochure and a picture in a brochure of the 20th anniversaies editions
I can't find the other pictures of all of them in my hard drive

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vega_ROCKS »</TD></TR><TR><TD CLASS="quote">thats a case by case thing. Just depends on who the previous owner was.
I have seen purple anodized Final Versions mr5s before. Those could have been either Finals or 20th redone.
And for some reason I have never seen a brochure and a picture in a brochure of the 20th anniversaies editions
</TD></TR></TABLE>
What center caps did the finals come with? Just the normal MR5 ones, right?
I could use 1 anniversary center cap if anyone has one. Otherwise I may cad one up myself and make aluminum remakes, since the original ones are plastic and don't really seem to last.
I have seen purple anodized Final Versions mr5s before. Those could have been either Finals or 20th redone.
And for some reason I have never seen a brochure and a picture in a brochure of the 20th anniversaies editions
</TD></TR></TABLE>What center caps did the finals come with? Just the normal MR5 ones, right?
I could use 1 anniversary center cap if anyone has one. Otherwise I may cad one up myself and make aluminum remakes, since the original ones are plastic and don't really seem to last.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hater »</TD></TR><TR><TD CLASS="quote">
What center caps did the finals come with? Just the normal MR5 ones, right?
I could use 1 anniversary center cap if anyone has one. Otherwise I may cad one up myself and make aluminum remakes, since the original ones are plastic and don't really seem to last.</TD></TR></TABLE>
yeah the finals came with the regular center caps
If you happen to make some more 20th center caps please let me know
I'm not blallin looking like this
What center caps did the finals come with? Just the normal MR5 ones, right?
I could use 1 anniversary center cap if anyone has one. Otherwise I may cad one up myself and make aluminum remakes, since the original ones are plastic and don't really seem to last.</TD></TR></TABLE>
yeah the finals came with the regular center caps
If you happen to make some more 20th center caps please let me know
I'm not blallin looking like this
A cool closeup Youtube vid of the Mugen S2000 pre-production model that was at TAS a few months back.
http://www.youtube.com/watch?v...lated
http://www.youtube.com/watch?v...lated
Honda-Tech Member
iTrader: (1)
Joined: Nov 2004
Posts: 15,687
Likes: 0
From: Rollin on 24K Gold Lug Nuts..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by The Destroyer »</TD></TR><TR><TD CLASS="quote">If anyone got the new Honda Tuning there is a sick Prelude on pg 33. Want moar pics.
Red on M7's, front bumper and headlight covers. Looks great.
</TD></TR></TABLE>
thats my friend Rex's car..sadly, its being parted out
http://www.hondamarketplace.co...22294
Red on M7's, front bumper and headlight covers. Looks great.
</TD></TR></TABLE>thats my friend Rex's car..sadly, its being parted out
http://www.hondamarketplace.co...22294




