<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-sol_si &raquo;</TD></TR><TR><TD CLASS="quote">Had a quick question though...I have the interior dome light on the second setting(goes on when doors are open) when I go overbumps at an angle the light flickers, is this because sols have bad body flex or is there a way to adjust the doors so they are closer to the light button in the doorsill</TD></TR></TABLE>this happens to mine too. I just turned it off since i don't really need it to begin with

 

true, but I like them on when I disarm the alarm.

 

The way i see it is no one can really hide in the car, so it's all good

 

yeah its the damn body flex... oddly enough my old sol never did that, but the new one does i just jammed a bunch of stuff in the rubber boot so it doesnt do it any more

 

my old sol did it just cuz the doors werent aligned quite right. My new one never does..... and also i have my alarm rigged up so it comes on when i disarm i like it, just cuz its kinda balla

 

wow my kindergarten crush just friended me on facebook.... yeah shes not hot

but a lot of other girls from preschool i knew got hot.....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WrongWD &raquo;</TD></TR><TR><TD CLASS="quote">yeah its the damn body flex... oddly enough my old sol never did that, but the new one does i just jammed a bunch of stuff in the rubber boot so it doesnt do it any more</TD></TR></TABLE>

think I'll try this, but isn't there a way to realign the doors. They currnetly aren't flush with either rear 1/4 pannel

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-sol_si &raquo;</TD></TR><TR><TD CLASS="quote">

Had a quick question though...I have the interior dome light on the second setting(goes on when doors are open) when I go overbumps at an angle the light flickers, is this because sols have bad body flex or is there a way to adjust the doors so they are closer to the light button in the doorsill
</TD></TR></TABLE>

My wife's did this too! Hers would come on when you turned only to the left...and it wouldnt flicker it would come on and stay on till you straightened up, Crazy.

 

mine comes on primarily when I let the driver side go over a bump first. too, but it goes off almost immediately, unless I leave it on the bump.

 

pre drop

post drop


sorry for the myspace angle on the second pic

 

*** the rain!!! just killed my project....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by WrongWD &raquo;</TD></TR><TR><TD CLASS="quote">wow my kindergarten crush just friended me on facebook.... yeah shes not hot

but a lot of other girls from preschool i knew got hot.....</TD></TR></TABLE>

haha funny you should mention. I just looked at my senior yearbook, i had forgotten how hot the girls at my highschool were. I got a few good ones to sign, and some with thier numbers... now that im in town for xmas break i kinda wanna call one or two, but it would probably just be akward and weird since i havent talked to hardly anyone from home for a long time.

Oh and how the hell do you remember preschool? i can barely remember elementary school.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-sol_si &raquo;</TD></TR><TR><TD CLASS="quote">

think I'll try this, but isn't there a way to realign the doors. They currnetly aren't flush with either rear 1/4 pannel</TD></TR></TABLE>

you can align them a little bit either at the hinges or move the strike plate back a little.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by solerizr &raquo;</TD></TR><TR><TD CLASS="quote">

you can align them a little bit either at the hinges or move the strike plate back a little.</TD></TR></TABLE>
Yup what ^^he^^ said, if your int light still flickers, pack up where the rubber boot hit's the door with a clear film adhesive (I dont know if american kids get duraseal over there), just cut a couple of circles and stick it to the door, did this on my accord.


I cant decide what wheels to get for the sol I've been procrastinating, turned away some 16x7 white desmonds, black/red RNR's, Sparco NS2 in red, I just cant decide, I would love some Work RSZ-R's but you can never find them over here.

Any suggestions?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chads &raquo;</TD></TR><TR><TD CLASS="quote">

</TD></TR></TABLE>

Looks awesome on those wheels!

How much are you lowered/what setup?

 

well, removed everything from the driverside...holy ****, every bolt was frozen and needed a lot of blow torch convincing to break free, and almost all are completely rounded off. Looks like honda will be making some money off of me come monday .

BTW, would it be ok to use the high temp caliper paint on the hub area of the rotor like some of the 2 pc. rotors that are available with the big brake kits. I know it's kind of ricey, but, I think seeing gloss black through the hub of the wheel would look better than the plain metal.

 

Is it still possible to find Sprint Harts? I really want a set but i have had no luck

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by delSloSiR626 &raquo;</TD></TR><TR><TD CLASS="quote">*** the rain!!! just killed my project....</TD></TR></TABLE>
hahaha sucker!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-sol_si &raquo;</TD></TR><TR><TD CLASS="quote">

BTW, would it be ok to use the high temp caliper paint on the hub area of the rotor like some of the 2 pc. rotors that are available with the big brake kits. I know it's kind of ricey, but, I think seeing gloss black through the hub of the wheel would look better than the plain metal.</TD></TR></TABLE>

Yeh i used normal matte black on mine, and it made the hub area kinda "disappear"

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AnotherEJ &raquo;</TD></TR><TR><TD CLASS="quote">

Looks awesome on those wheels!

How much are you lowered/what setup?</TD></TR></TABLE>

its lowered on Ksports not sure of the exact drop. but i still have like 2 full inches of drop left in them

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by solerizr &raquo;</TD></TR><TR><TD CLASS="quote">

Yeh i used normal matte black on mine, and it made the hub area kinda "disappear"</TD></TR></TABLE>

cool. I'll just do A Lot of very careful masking and brushing

well passenger side front removal went sooo much easier it was a nice suprise, about 1/4 of the way done now


damn 2 in a row, I'll get some pics of the progress a little later,(I'll save up my pics and unleash a bunch at once )

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chads &raquo;</TD></TR><TR><TD CLASS="quote">

its lowered on Ksports not sure of the exact drop. but i still have like 2 full inches of drop left in them </TD></TR></TABLE>

Wow thats crazy, I think it looks perfect

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-sol_si &raquo;</TD></TR><TR><TD CLASS="quote">

cool. I'll just do A Lot of very careful masking and brushing
</TD></TR></TABLE>

Brushing? id do it with a rattle can...

Oh and even if you do get a little overspray, itl be gone as soon as you step on the brakes.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AnotherEJ &raquo;</TD></TR><TR><TD CLASS="quote">

Wow thats crazy, I think it looks perfect </TD></TR></TABLE>

thanks, Ksports are under 800 bucks you really cant beat the price and 36way adj

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Berman &raquo;</TD></TR><TR><TD CLASS="quote">I cant decide what wheels to get for the sol I've been procrastinating, turned away some 16x7 white desmonds, black/red RNR's, Sparco NS2 in red, I just cant decide, I would love some Work RSZ-R's but you can never find them over here.</TD></TR></TABLE>

u turned away some white desmonds!
id kill for a set.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chads &raquo;</TD></TR><TR><TD CLASS="quote">

thanks, Ksports are under 800 bucks you really cant beat the price and 36way adj </TD></TR></TABLE>

hows it ride bro?