del Sol thread v 2.0!
Honda-Tech Member
Join Date: Dec 2007
Location: FoCo, Georgia, United States
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Re: (k0rupt_ed)
its a fairly big deal... make sure you have a good jack and jack stands. the hardest part is getting to all the bolts. and MAKE SURE YOU TAKE OUT THE STARTER SOLENOID BOLT!!! ITS HUGE AND WILL HOLD THE TRANNY TO THE MOTOR BY ITSELF... found that out after yanking on mine for about 2 hours and wondering WHY THE [freak] this bitch wouldnt come off haha, i felt retarded.
and getting the splines lined back up to get the tranny back on is a pretty huge bitch as well. bottom line... if you can find a reputable place to do it for like $150-200... get them to do it instead of doing it in your garage, but it is do-able, just get ready for some frustrating times.
and getting the splines lined back up to get the tranny back on is a pretty huge bitch as well. bottom line... if you can find a reputable place to do it for like $150-200... get them to do it instead of doing it in your garage, but it is do-able, just get ready for some frustrating times.
Honda-Tech Member
Join Date: Nov 2005
Location: 805, CA, US
Posts: 9,872
Likes: 0
Received 0 Likes
on
0 Posts
Re: (k0rupt_ed)
It's an absolute bitch....when I still had the hatch I did it myself the first time.....Murphy's law was in FULL effect...took me almost 12 hours total and a lot of bashed knuckles. 2nd time around I took it to a very reputable shop that did it for 300 (with the flywheel install being included) and had it back to me that night. air tools, a lift and having done it 100s if not 1000s of times make a huge difference LOL
Honda-Tech Member
Join Date: Dec 2007
Location: FoCo, Georgia, United States
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Re: (broketuner-Sol_Si)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-Sol_Si »</TD></TR><TR><TD CLASS="quote">took me almost 12 hours total and a lot of bashed knuckles</TD></TR></TABLE>
bwahahha it took me almost exactly 12 as well... its the magic number i suppose.
bwahahha it took me almost exactly 12 as well... its the magic number i suppose.
Junior Member
Join Date: May 2004
Location: staten island, ny, united states
Posts: 691
Likes: 0
Received 0 Likes
on
0 Posts
chris, if you rent an air compressor with a hose and everything.. have all the parts, and a 6 pack ill do it for you in 4 hours on the weekend.. if not less
Honda-Tech Member
Join Date: Dec 2004
Location: Unda Da Sea, GA, USA
Posts: 958
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jdeemseerx)
Justin! here's two more interior shots!
oh as for the clutch/tranny job i think its pretty straightforward. you may want help your first time but after that it should be a breeze.
dont get me wrong... its STILL and always will be a pain in the *** but a breeze nonetheless
oh as for the clutch/tranny job i think its pretty straightforward. you may want help your first time but after that it should be a breeze.
dont get me wrong... its STILL and always will be a pain in the *** but a breeze nonetheless
Honda-Tech Member
Join Date: Dec 2007
Location: FoCo, Georgia, United States
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Dirty Octopus)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dirty Octopus »</TD></TR><TR><TD CLASS="quote">Justin! here's two more interior shots! </TD></TR></TABLE>
thanks maaaaan
thanks maaaaan
Re: (clean_sol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean_sol »</TD></TR><TR><TD CLASS="quote">... AHH ownage...
and i think i have a twin.
</TD></TR></TABLE>
But... Your Motor > My Motor!!!!
and i think i have a twin.
</TD></TR></TABLE>
But... Your Motor > My Motor!!!!
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2006
Location: NY/NH
Posts: 4,951
Likes: 0
Received 0 Likes
on
0 Posts
Re: (clean_sol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean_sol »</TD></TR><TR><TD CLASS="quote">oh thats for b16... idk what your rocking.</TD></TR></TABLE>
oh wow, thanks for bringing that up
chris, i never even asked you what motor you had when u wanted a price for the clutch
the price i gave you was for b-series lol
oh and i hate doing clutches more than any other job for a car
just such a PITA and I might as well take out the whole motor for that amount of work, since it would be easier working with out out of the car rather than halfway in
I mean the job is not that bad or hard to do at all, and I can probably do a b-series in under an hour at full speed, my buddies took out his tranny in his del sol in 20 min lol
(but k-series is a different story specially on a k-series car, like DC5 or EP3, with the subframe and everything)
but things get in the way like turbo-kits, traction bars, etc that make an already unpleasant job even more frustrating
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-Sol_Si »</TD></TR><TR><TD CLASS="quote">It's an absolute bitch....when I still had the hatch I did it myself the first time.....Murphy's law was in FULL effect...took me almost 12 hours total and a lot of bashed knuckles. 2nd time around I took it to a very reputable shop that did it for 300 (with the flywheel install being included) and had it back to me that night. air tools, a lift and having done it 100s if not 1000s of times make a huge difference LOL</TD></TR></TABLE>
very true about the lift and tools
i've only worked with tools and lift, have/would never do on the ground and ESPECIALLY not outside lol (i have taken a motor outside with a jack and stand but thats it)
and even with the right equipment I still wouldn't want to do them even tho they pay good money
$300 is a pretty good price and worth it just to keep your hand/knuckles free of bandages
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dirty Octopus »</TD></TR><TR><TD CLASS="quote">
dont get me wrong... its STILL and always will be a pain in the *** but a breeze nonetheless
</TD></TR></TABLE>
haha....SO TRUE lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdeemseerx »</TD></TR><TR><TD CLASS="quote">chris, if you rent an air compressor with a hose and everything.. have all the parts, and a 6 pack ill do it for you in 4 hours on the weekend.. if not less </TD></TR></TABLE>
wow, what a nice friend
oh wow, thanks for bringing that up
chris, i never even asked you what motor you had when u wanted a price for the clutch
the price i gave you was for b-series lol
oh and i hate doing clutches more than any other job for a car
just such a PITA and I might as well take out the whole motor for that amount of work, since it would be easier working with out out of the car rather than halfway in
I mean the job is not that bad or hard to do at all, and I can probably do a b-series in under an hour at full speed, my buddies took out his tranny in his del sol in 20 min lol
(but k-series is a different story specially on a k-series car, like DC5 or EP3, with the subframe and everything)
but things get in the way like turbo-kits, traction bars, etc that make an already unpleasant job even more frustrating
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by broketuner-Sol_Si »</TD></TR><TR><TD CLASS="quote">It's an absolute bitch....when I still had the hatch I did it myself the first time.....Murphy's law was in FULL effect...took me almost 12 hours total and a lot of bashed knuckles. 2nd time around I took it to a very reputable shop that did it for 300 (with the flywheel install being included) and had it back to me that night. air tools, a lift and having done it 100s if not 1000s of times make a huge difference LOL</TD></TR></TABLE>
very true about the lift and tools
i've only worked with tools and lift, have/would never do on the ground and ESPECIALLY not outside lol (i have taken a motor outside with a jack and stand but thats it)
and even with the right equipment I still wouldn't want to do them even tho they pay good money
$300 is a pretty good price and worth it just to keep your hand/knuckles free of bandages
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dirty Octopus »</TD></TR><TR><TD CLASS="quote">
dont get me wrong... its STILL and always will be a pain in the *** but a breeze nonetheless
</TD></TR></TABLE>
haha....SO TRUE lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdeemseerx »</TD></TR><TR><TD CLASS="quote">chris, if you rent an air compressor with a hose and everything.. have all the parts, and a 6 pack ill do it for you in 4 hours on the weekend.. if not less </TD></TR></TABLE>
wow, what a nice friend
Honda-Tech Member
Join Date: Dec 2007
Location: FoCo, Georgia, United States
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Re: (CEMAYHALL)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CEMAYHALL »</TD></TR><TR><TD CLASS="quote">
But... Your Motor > My Motor!!!!
</TD></TR></TABLE>
haha cause my mota' is mo' gangster
But... Your Motor > My Motor!!!!
</TD></TR></TABLE>
haha cause my mota' is mo' gangster
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2006
Location: NY/NH
Posts: 4,951
Likes: 0
Received 0 Likes
on
0 Posts
Re: (CEMAYHALL)
for foam
another del sol that I competed against at the BOTI show
he was mad and talking **** to my buddy that he didn't win best del sol/crx OR best jdm....
another del sol that I competed against at the BOTI show
he was mad and talking **** to my buddy that he didn't win best del sol/crx OR best jdm....
Honda-Tech Member
Join Date: Apr 2007
Location: Being A Stallion in, Maine, USA
Posts: 3,156
Likes: 0
Received 0 Likes
on
0 Posts
Re: (clean_sol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean_sol »</TD></TR><TR><TD CLASS="quote">
</TD></TR></TABLE>
curious george kicks more *** than you understand...
</TD></TR></TABLE>
curious george kicks more *** than you understand...
Re: (clean_sol)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by clean_sol »</TD></TR><TR><TD CLASS="quote">haha cause my mota' is mo' gangster</TD></TR></TABLE>
FO SHO
FO SHO
Honda-Tech Member
iTrader: (1)
Join Date: Apr 2006
Location: NY/NH
Posts: 4,951
Likes: 0
Received 0 Likes
on
0 Posts
Re: (CEMAYHALL)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by CEMAYHALL »</TD></TR><TR><TD CLASS="quote">
FO SHO </TD></TR></TABLE>
but not for long cause you're going to do a swap right
FO SHO </TD></TR></TABLE>
but not for long cause you're going to do a swap right
Honda-Tech Member
Join Date: Dec 2007
Location: FoCo, Georgia, United States
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Re: (mugen-k)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mugen-k »</TD></TR><TR><TD CLASS="quote">for foam
</TD></TR></TABLE>
that thing would be hot if he wasn't TRYING to be so jdm. jebus, 234 rising suns, shoshibabatoyoya thingy, drags (hehe), tow hook, shocker stickers galore.
anyway.
and thanks for the compliments on george sirs.
</TD></TR></TABLE>
that thing would be hot if he wasn't TRYING to be so jdm. jebus, 234 rising suns, shoshibabatoyoya thingy, drags (hehe), tow hook, shocker stickers galore.
anyway.
and thanks for the compliments on george sirs.
Honda-Tech Member
iTrader: (1)
Join Date: Jul 2007
Location: Somewhere, Ny
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
hmm i could probably borrow my friends compressor or my uncles,
beer, name it lol
trani, gettin there, clutch and flywheel kit im prob gonna get the same as yours
me and you could def bang it out
beer, name it lol
trani, gettin there, clutch and flywheel kit im prob gonna get the same as yours
me and you could def bang it out
Junior Member
Join Date: Jan 2007
Location: Glace Bay, Nova Scotia, Canada
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
Thanks , yah the fins werent on when i took them pics cause it had just come out of paint and they werent painted at the time ..... there on now tho!
Honda-Tech Member
Join Date: Dec 2007
Location: FoCo, Georgia, United States
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
mind your ownage manners sir ^^...
__________________________________________________ ____________
anyway these last few pages have been <FONT SIZE="6">EXCELLENT!</FONT>
lots of pictures of quality sols... keep it up sirs (and possible madams?)
__________________________________________________ ____________
anyway these last few pages have been <FONT SIZE="6">EXCELLENT!</FONT>
lots of pictures of quality sols... keep it up sirs (and possible madams?)