A few bits and pieces.






Its coming together will get out a proper camera when it does.

 

nice pics.<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbozxi &raquo;</TD></TR><TR><TD CLASS="quote">A few bits and pieces.


Its coming together will get out a proper camera when it does. </TD></TR></TABLE>

 

ooooh ****, looks like OG mugen skirts are FINALLY found SOMEWHERE.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dee A Nine &raquo;</TD></TR><TR><TD CLASS="quote">ooooh ****, looks like OG mugen skirts are FINALLY found SOMEWHERE.</TD></TR></TABLE>New Zealand. Little cracked need a bit of fibreglass and then paint. Anyone keen on some OEM skirts? minus the end caps.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g2_teg_ &raquo;</TD></TR><TR><TD CLASS="quote">nice pics.</TD></TR></TABLE> I;m down for fotoshots weneva dude..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DENCIO &raquo;</TD></TR><TR><TD CLASS="quote">put 200 miles on her freshly,semi built motor and got full 3" exhaust installed...


</TD></TR></TABLE>

yeah i'm sure of it... your offset is different than mine =[ trade ya for my bbr's haha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bigplayj17 &raquo;</TD></TR><TR><TD CLASS="quote"> </TD></TR></TABLE>

what rims are those...and the size on them?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Brice.Hayden &raquo;</TD></TR><TR><TD CLASS="quote">whats up wheel *****!!
Enkeis???</TD></TR></TABLE>
enkie/bbr comp 6
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jdmkrazie &raquo;</TD></TR><TR><TD CLASS="quote">

yeah i'm sure of it... your offset is different than mine =[ trade ya for my bbr's haha </TD></TR></TABLE>
maybe next time

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Morasso &raquo;</TD></TR><TR><TD CLASS="quote">

I always find the sickest DAs</TD></TR></TABLE>

something i would not do but kinda cool

 

 

cool DA's but wheres real Da's with functionality over fashion?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mattyg2 &raquo;</TD></TR><TR><TD CLASS="quote">cool DA's but wheres real Da's with functionality over fashion?</TD></TR></TABLE>
hahaah

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mattyg2 &raquo;</TD></TR><TR><TD CLASS="quote">cool DA's but wheres real Da's with functionality over fashion?</TD></TR></TABLE>
autotrader has a lot of stock DAs

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DENCIO &raquo;</TD></TR><TR><TD CLASS="quote">
autotrader has a lot of stock DAs </TD></TR></TABLE>

actually when i go on there i see a lot of integras with b16s or ls vtecs being sold yours looks good though maybe i'm just a suspension/brake/tire ***** so i like to see those more pointed out than anything.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbozxi &raquo;</TD></TR><TR><TD CLASS="quote">A few bits and pieces.






Its coming together will get out a proper camera when it does. </TD></TR></TABLE>

what suspension/brake setup are you running? be sure to flush that fluid out with a good fluid

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by integraXTC &raquo;</TD></TR><TR><TD CLASS="quote">I used to have an armrest on my DA, that I bought on g2ic. I even have some scanned copies of the install instructions. It says you have to drill holes. It's gonna be pretty hard, it's thick *** metal, but you'll manage. </TD></TR></TABLE>

Post the install instructions, the ones i found online were pretty shitty.

I see that they give you RIV nuts with the original arm rest kit. Im gonna try to source some and install it per the instructions. I just dont wanna drill some holes and use screws to hold it in, would rather do it the right way.


Modified by Kevin at 9:27 PM 9/23/2007

 

anyone want a jdm hood for 50 bucks?

pm me!

Socal

 

im pretty sure im gonna sell my db.. so if anyone wants it and feels like coming to ohio to get it should do so..

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mattyg2 &raquo;</TD></TR><TR><TD CLASS="quote">

what suspension/brake setup are you running? be sure to flush that fluid out with a good fluid </TD></TR></TABLE> Eh just koni yellows and Nuespeed race springs, the crappy Nuespeeds aren't captive in the front some getting the shocks shorthened this week. Whiteline swaybars front and rear, and some generic strut braces. Car handles like junk!!!!

Going to get some Urethane RTA bushings as mine are shot will this improve the feel much?

Brakes are just BB4 Prelude calipers, with slotted BB4 disc drilled to 4*100, braided brake lines. Need to do something about the master cylinder still figuring out my best option.

Also got a Manual steering rack today out of a Rsi Da6 hopefully bolt in without dramas.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Dee A Nine &raquo;</TD></TR><TR><TD CLASS="quote">ooooh ****, looks like OG mugen skirts are FINALLY found SOMEWHERE.</TD></TR></TABLE>

Damnit I want me some OG Mugen skirts!!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbozxi &raquo;</TD></TR><TR><TD CLASS="quote"> Eh just koni yellows and Nuespeed race springs, the crappy Nuespeeds aren't captive in the front some getting the shocks shorthened this week. Whiteline swaybars front and rear, and some generic strut braces. Car handles like junk!!!!

Going to get some Urethane RTA bushings as mine are shot will this improve the feel much?

Brakes are just BB4 Prelude calipers, with slotted BB4 disc drilled to 4*100, braided brake lines. Need to do something about the master cylinder still figuring out my best option.

Also got a Manual steering rack today out of a Rsi Da6 hopefully bolt in without dramas.</TD></TR></TABLE>

get Honda OEM for the RTA bushing, i haven't did it but i hear the OG DA owners swear by the OEM bushing for the RTA, that sounds like a good brake setup, but flush the fluid with something good!!! what pads will you be running?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mattyg2 &raquo;</TD></TR><TR><TD CLASS="quote">

get Honda OEM for the RTA bushing, i haven't did it but i hear the OG DA owners swear by the OEM bushing for the RTA, that sounds like a good brake setup, but flush the fluid with something good!!! what pads will you be running?</TD></TR></TABLE>Yeah I have another dude telling me to use rubber RTA's, the pads I have are some generic brand there actually made in the Lucas factory mass produced so cheap but are rated up to 600c got them all round also got new rotors for the rear. Using Mintex 5.1 fluid at the moment was reccomended it by a brake specialist will see how well it goes...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 702_DA9 &raquo;</TD></TR><TR><TD CLASS="quote">my da on some racing hart cpf tuner
</TD></TR></TABLE>

YOUR YARD ROCKS !

Nice car!
J.

 

^^thanks ..

 

My bitch *** finally got some wheels...





OG Volks AVs. Thanks Brice! I know everyone hated on these HARD when they were on Brice's DA, but i'm in love with them. I never realized how different ride quality would be with a good set of wheels with GOOD tires... Crazy!

holla