hb420

iTrader: (1)

Damm colby, what a trip this is for you

Don't mind the radio, i still have to fix that and replace the armrest with a cloth one

kiDchaos

did you have to do a lot of cleaning after you got it? It really looks like its in good shape.

hb420

iTrader: (1)

I replaced the seats, cleaned the carpet and cleaned out the hatch area. I didn't wash, wax or claybar it yet plus i still have to repaint the moldings. I will be repainting the bumpers and hood plus wetsanding and buffing the passenger side rear quarter panel

OldSkoolDa91

car looks really good herb. i wanna see another pic like that last one you took, but a slightly different angle to see the wheels a lil more

Ax3l

Nice one hb420. I want more of the wheels too.

tougetuned_ef

so i made it 880 miles today and when i went to stop to give the car a rest and burp one more time beofre the last 200 miles, same thing happened. but i noticed something that i heard yesterday but didnt really pay much mind to it. the sound is coming from under the gas tank. i looked for a leak but it sounds like the fuel pump whining really loud. but i started looking at my dc2 and da service manuals and the say that im supposed to have 41-48 psi on my fuel pressure gauge. ive always had 37psi during idle. then i started thinking that it was happening after i was doing hills or avg 80mph. it has an old fpr with unknown miles. so i think during hard load its starving the fuel pump. what do you guys think?

but i just arrived after letting the car sit for 2 hours, then 90 mile tow 1.5 hours, and then eating food on the hood for 45 min. i drove it on this side road back and fourth up to 5 gear 65mph and then i went for it. 145 miles finally done.

Colin

iTrader: (1)

Those floormats look pretty MINT Herb! Did they come w/ that car or are they something you acquired elsewhere. When I got my set I couldn't bring myself to actually use them in the car for fear of getting 'em dirty.

tougetuned_ef

i think the ones he gave me were from that car. all the spikes are missing off the bottom so sometime my driver slides up when i get in the car. i need to fix my carpet anyway. i need all the little rings the hold it to the door sills.

tougetuned_ef

i just finished doing a compression check and my motor is good. i got 185,185,185,190. so im going to replace that stat that i cut up, replce the tb, wp, tensioner, fuel pump, and fpr. after hearing all that noise from the tank when it would act up the way it was tells me its bad. and the fact that my gauge says 37 psi to the rail and i dont know where that fpr came from. i had an adjustable one but cant find it. it may have gotten tossed.

dmacneil91

I've been looking for replica side skirts for a while and those VIS Techno R ones look awesome. For only $114 cheap if you ask me.

http://www.andysautosport.com/acura/...r00236208.html


How do you go about repainting the moldings? Just wondering..

tougetuned_ef

so why the hell is everything that i really need for a da discontinued!!!! i just oredered a 00' si fpr cause the da grs one is discontinued, and i ordered a new stat to replace the one i cut up.

does anybody know where i can get a walbro 190? alls i can find is the 225. is the 225 too big or does it not matter because the fpr regulates it anyway? im just getting an oem fpr. its a stock motor and they dont make the one i had before that replces the whole thing. just the one that goes onto your existing one. and i think mine is bad.

be18see1

255 is fine.

92NoTeC

The 255 tends to "overrun" the stock fpr so you'll be a tad rich, but otherwise ok.

Streetrays has the 190: http://streetrays.com/store/index.ph...oduct_id=44675

As well as Lightning Motorsports: http://lightningmotorsports.com/walb.../i-269879.aspx

HardLuckfoto

These are both around the same price and in my budget.... What would you guys suggest out of these two ?

hb420

iTrader: (1)

fnf over those two for sure

Lord Helmet

Neither. I would get Progress CSII or koni/GC. BTW I had the FNF: clunky and bouncy... big disappointment IMO. I'm riding on Progress CSII right now and it's night and day compared to the FNF, Ksport, D2, etc... I use to have.

Megan: garbage

HardLuckfoto

So where can I buy the PROGRESS CS-II for my DA? Searched a little bit but cant find anything for the DA chassis

slammedg2

i was reading somewhere and i think they same company that makes the megan on also makes the FNF i know a could people with the FnF he likes them on his sk2 and my other buddy had them on his rsx and the fronts blew out but i was thinking about going Fnf on my rhd da idk yet

slammedg2

i had tein coilovers on one of my DA's road like **** think cut springs ride better than them lol

OldSkoolDa91

i've got tein ss on mine and it rides just fine (when my car is actually together and on the road

dmacneil91

Do some research. Both those coilovers are garbage. Like Lord Helmet said, Progress CS-II or a Koni/GC combo. I personally am going for the Progress CS-II because of the price (about $600 shipped) but if you have the extra cash go for a Koni/GC combo its hands down the best suspension you can get besides AMR.

I think there's a re-seller in the forums but you can order for the DA straight from their website. Warning they won't ship until first week of August (called about a week ago and that's what I was told).

http://www.progressauto.com/products.../productID/500

Bond

I'm running Koni/GC setup on both my daily drivers. I have to say that this combo is the best I have ever driven on the street.

I have some apexi coilovers in my project DA that I can't wait to put to the test and experience.

be18see1

Had FF type 1's and loved them. Then again, I only ever put maybe 2k miles on my car lol

Brice.Hayden

iTrader: (15)

I've had D2 and Function Form on many cars and they have been great. NOT clunky or bouncy at all. I've tracked, road raced and auto crossed both brands and have been very happy.

HardLuckfoto

Thanks for all the input guys! Love this DA community