!!!---(775 SQUAD)---!!!
yeah thanx i need to get my si on here and i do wanna run him to see wer i stand logan .....chris is my nigggggga!!!!!!!!!!!!!!!! jeaaa does anyone want any script tattoos im doing a special for 40
We were planning to do one before the end of summer. I think we should do it in reno though. There is a lot more people. During August is not a bad idea. We should try to get someone to sponser a BBQ, maybe make a charity deal with a low entry fee. I know a few people at the Boys and Girls Club up there and down here. Then after the show shine and BBQ go for a lite curse around Reno.
We were planning to do one before the end of summer. I think we should do it in reno though. There is a lot more people. During August is not a bad idea. We should try to get someone to sponsor a BBQ, maybe make a charity deal with a low entry fee. I know a few people at the Boys and Girls Club up there and down here. Then after the show shine and BBQ go for a lite curse around Reno.
I found a few sites online... does anyone know somebody locally where we can get the stickers done for cheap??? Like 5 to 10 bucks a sticker???
There's a shop here in carson that would be our best bet. You need to have the design already made so all he needs to do is upload it so he can print them. There right behind the train museum just before the hill.
i sent fritasfamily a pm about the stickers i can get them made i made jdm era stickers and eviltek sticker and the drag day eviltek stickers all i need a a font or email of the desighn and print them out all already cut and ready to be sold or used.....i have black red and white colors.. pm me
for sale!!!!!!!!!!!!!!!!!!!!!!!!!! check it out!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
im selling a fully built race b18a witha b16a head due to having a kid and not having anythng for the medical bills and all put tryn to get out the race scene.....
ls b18a block
has 500 miles on build from alaniz dfr race shop in california
91 Ls Block
Bored .5 over
New 81.5mm high compresion full race pistons
Pistons Diped n a protective coating to make them stronger will withstand high heat and rpm
New arp head studs
New new comet 3 layer head gasket
New golden eagle dowel pins
New gaskets from top to bottom
New 4-1 race headers
New 2 1/2 inch full race catback exhaust
New Nitric pistons rings
New ARP rod bolts..
New ls rods shotpeend
New Race bearings
Micropolished n balanced crankshaft
New Kings thrust Full Race Bearings
New main seal
p75 obd1 tuned and chipped ecu
redline 8500rpms/vtech hits at 4000 rpms
obd2 wireing harness
new performance lightend pully
All seals are brand new block was decked and cleaned before the build ...block was shaved for higher compression
2000 b16a full race head
head has 0 miles built by alaniz dfr race shop in california
full race all angles port and polish also has coating over polish for flow test...flow test was real good by the way
all new seals and pins
new supertech valve guides
new supertech flat vaves
new supertech retainers
new supertech spring... very strong
supertech everythng no oem in it....
toda spec bs stage 2 cams
intake side bored .5 oversized for more air flow
walls where shaved down for better flow and low temps..
head was shaver for higher comp.
head was also polished and cleaned
new b16 dizzy
str high voume fuel rail
costum injector clips
b16 intake manifold
new b16 megan full 4-1 race header
new full 2 1/2 full race catback exhaust
this is all motor 12 sec set up fully built theres been alot of time and money into this looking to sell it for a good price comp on motor is 13.1-7
already tuned and chiped looking for some money or a nice car trade open for offer but money is king serious buyer only email T04Bturbo@hotmail.com will respond asap. 775 453 8973 ask for jose or pm me
im selling a fully built race b18a witha b16a head due to having a kid and not having anythng for the medical bills and all put tryn to get out the race scene.....
ls b18a block
has 500 miles on build from alaniz dfr race shop in california
91 Ls Block
Bored .5 over
New 81.5mm high compresion full race pistons
Pistons Diped n a protective coating to make them stronger will withstand high heat and rpm
New arp head studs
New new comet 3 layer head gasket
New golden eagle dowel pins
New gaskets from top to bottom
New 4-1 race headers
New 2 1/2 inch full race catback exhaust
New Nitric pistons rings
New ARP rod bolts..
New ls rods shotpeend
New Race bearings
Micropolished n balanced crankshaft
New Kings thrust Full Race Bearings
New main seal
p75 obd1 tuned and chipped ecu
redline 8500rpms/vtech hits at 4000 rpms
obd2 wireing harness
new performance lightend pully
All seals are brand new block was decked and cleaned before the build ...block was shaved for higher compression
2000 b16a full race head
head has 0 miles built by alaniz dfr race shop in california
full race all angles port and polish also has coating over polish for flow test...flow test was real good by the way
all new seals and pins
new supertech valve guides
new supertech flat vaves
new supertech retainers
new supertech spring... very strong
supertech everythng no oem in it....
toda spec bs stage 2 cams
intake side bored .5 oversized for more air flow
walls where shaved down for better flow and low temps..
head was shaver for higher comp.
head was also polished and cleaned
new b16 dizzy
str high voume fuel rail
costum injector clips
b16 intake manifold
new b16 megan full 4-1 race header
new full 2 1/2 full race catback exhaust
this is all motor 12 sec set up fully built theres been alot of time and money into this looking to sell it for a good price comp on motor is 13.1-7
already tuned and chiped looking for some money or a nice car trade open for offer but money is king serious buyer only email T04Bturbo@hotmail.com will respond asap. 775 453 8973 ask for jose or pm me
I have some old school sparco 16'' rims with like new 205/40/16 tires that i want to trade for other 16''rims with good tires and maybe cash on top. There painted red with polished lips. Little rash but can be buffed out. Let me know what you got and post pics. Thanks guys. 775-443-0976 ask for Kyle.







but i reallu want to go