GMG guys.

Is anyone using the horn on their aftermarket steering wheel. I saw couple diy threads but it doesn't look safe to have all the wires exposed.





Anyone has a different idea or technique for this issue?

 

port, cyber -thanks for the info and link
viskii-i actually ran a new wire from the harness under the steering collum but make sure your wire is a lil long so it doesnt bind when you turn

 

and also im looking for a b18c head in good shape also if anyone is selling one or knows someone selling one

 

that's not bad idea but over time there is a chance the wire would get tangled up.

I was thinking of using the windshield water switch. Run the power from the switch to the horn and ground it on the chassis.

 

i've seen a DIY where there is a fabbed contact plate to the back of an NRG hub which also has a brass plate.

 

a contact plate is not a bad idea, in fact many manufacturers use that method to activate the horn. the switch does not sound like a bad idea either, but doesn't sound natural. i mean when someone cuts you off at least for me i've found i naturally reflex slap my hands to the center of the wheel. if you were to run a wire, it would wear out over time from all the flexing and bending when you turn. how does the back of your horn and wheel look like? as far as safety, you should be ok since the circuit is for the horn only. worst case scenario would be your horn stays on forever.

 

thanks man

[QUOTE=why o why? but i know what u mean bro.
TSX is more practical probably in every way than the s2k IMHO although i dont mind having one.
u parting out or selling the car as is?
i never got the chance to hit u up on those wheels again
i've been busy working trying to complete the 4dr.[/QUOTE]

i still have the wheels though man and i will part the car, trying to sell for $6000 stock mode obo

 

post up some pics of her man, ***** her out

 

Kinda hard on my mobile phone, look for me on myspace mugenboy_carlos and post them for me : )

 

MUGEN BOY WHERE FROM BP ARE YOU FROM.
LIKE WHAT PART?

 

MUGEN BOY WHERE FROM BP ARE YOU FROM.
LIKE WHAT PART?

 

Double post and caps excited!

 

Lol I work by island motorsports right by Fullerton airport off commonwealth and Dale and live in norwalk.

 

hey mike, im currently sitting in my car right now figuring how to get these 4dr integ seats into the 4dr, im a lil lost, the back rest wont bolt to anything. any help on what to do exactly/

 

what are you working with Dropeasy? what kind of seats? pics? the seats i used are 2 piece, i have no experience with the 5 piece rear seats (2 seat backs, seat cushion, and 2 side bolsters).

 

ahh.. no wonder, yeah mines is the 5 piece, its the gsr 4 door cloth, its same as my front seats if you remembered. im sitting next to my fuelpump trying to figure it out. theres this bracket kinda close to the middle that gets in the way

 

Evening guys!

here's a pic from earlier when I was leaving the hot rod shop, not the greatest I caught the sun lol..

 

that's the 60/40 split anchor, do your Integra seats have a 60/40 split? IIRC the anchor is spot welded on at 4 points (maybe 6), i went ahead and removed my anchor since my seat back is a one piece. do the side bolsters pop in?

 

yeah my back piece is a one piece, it doesnt have the split. yeah the anchor is the spot that is in the way. the bolsters goes in fine, seems to have a lil more space towards the door. how do you remove the anchor? do i need a special type of equip

 

Moose, looking good! Gotta love a freshly washed green sedan. I finally got to wash mine today (no pics thoough) and man the green really pops when its clean.

 

You just need a spot weld drill bit and a cold chisel and hammer. Lots of patience. What are you doing with the locking mechanism?

 

I really wish I had spare $ for clay bar so I could really get it to shine and pop, but maintainance comes first.

 

Yep.. Little to no heat transfer with the nylon. Lol, you serious about the extender? Most ppl don't care for them. I've even heard "aren't you going the wrong way? I thought you were supposed to make the shifter shorter!"
Blah..

Looking good moose! I like the color combo

 

So Did you go lower moose?
You see how they don't care for my car on the other thread lol just joking

so now I have SIR bumpers up for sale if anyone is interested?

 

Whoops sorry double post not used to my new phone yet lol