kordenbrock motorsports

thank you very much guys. i am aware that it takes 2-3 weeks. just wanting to see how its all going. thanks for the resposes guys, its much appreciated.

brett

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brettII &raquo;</TD></TR><TR><TD CLASS="quote">thank you very much guys. i am aware that it takes 2-3 weeks. just wanting to see how its all going. thanks for the resposes guys, its much appreciated.

brett</TD></TR></TABLE>

G"UNIT

Does the wastegate hit the half stack raditor in a 1992 acura integra? I read one thread were a guy had to cut his manifold alittle.. If so is there anyway I could get it made so it dont?

02civicHB

Can you quote me a price with the WG exhausting into the DP

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 02civicHB &raquo;</TD></TR><TR><TD CLASS="quote">Can you quote me a price with the WG exhausting into the DP</TD></TR></TABLE>

I will show this to Matt on Monday or this weekend when I see him at NOPI Race IN NC then get back to you sir.

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">UP UP UP!!!!!!</TD></TR></TABLE>

gelok

iTrader: (7)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

Best I have is this right now unless Matt has more pics




2-3 Week turn around time</TD></TR></TABLE>

Hi... can you please tell me where the wastegate will be located with this non AC manifold? I'm very interested. Thanks

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gelok &raquo;</TD></TR><TR><TD CLASS="quote">

Hi... can you please tell me where the wastegate will be located with this non AC manifold? I'm very interested. Thanks </TD></TR></TABLE>


We will try to get pics up later to show you sir

02civicHB

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostfed.com &raquo;</TD></TR><TR><TD CLASS="quote">

$1125 shipped for both and no the wg does not dump into the dp sir</TD></TR></TABLE>

Quote, originally posted by 02civicHB »
Can you quote me a price with the WG exhausting into the DP

I will show this to Matt on Monday or this weekend when I see him at NOPI Race IN NC then get back to you sir.


--------------------------------------------------------------------------------

BOOSTFED.COM


Any Word on this Boostfed? What is the price for the Mani, Downpipe & Dump pipe if the I can't get it dumping into the downpipe.

Ps. I'm ready to Buy!!!

-Ed

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 02civicHB &raquo;</TD></TR><TR><TD CLASS="quote">

Quote, originally posted by 02civicHB »
Can you quote me a price with the WG exhausting into the DP

I will show this to Matt on Monday or this weekend when I see him at NOPI Race IN NC then get back to you sir.


--------------------------------------------------------------------------------

BOOSTFED.COM


Any Word on this Boostfed? What is the price for the Mani, Downpipe & Dump pipe if the I can't get it dumping into the downpipe.

Ps. I'm ready to Buy!!!

-Ed</TD></TR></TABLE>

$1200 total shipped sir

02civicHB

Terry,

I got this pic from the OneFab website and it shows the K-series manifold with the WG connected to the Mani and the down pipe, this is the setup I'm interested in. Can you find out if this is the "kit" I would get? Thanks.

http://www.one-fab.com/images/Manifold/kt1_3.jpg

This One

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 02civicHB &raquo;</TD></TR><TR><TD CLASS="quote">Terry,

I got this pic from the OneFab website and it shows the K-series manifold with the WG connected to the Mani and the down pipe, this is the setup I'm interested in. Can you find out if this is the "kit" I would get? Thanks.

http://www.one-fab.com/images/Manifold/kt1_3.jpg</TD></TR></TABLE>


That Was an in house setup that I built personally.
The K series Stuff is very limited in space, and there are so many variations in fitment between motors, chassis, accessories, etc... Its hard to make something that is Universal with all those things in mind.

Therefore I can not accomadate all those needs without the possibility Of you having fitment problems. On top of that These things were in mind when this setup was developed, so I didnt pursue any ways to produce these things. I cannot produce them t this time as I do not have a chassis to work with. The main components Were all that was developed when we Had the chassis to work with.

-Matt

02civicHB

Thanks for the quick reply Matt. I still want the Manifold, down Pipe & I guess dump pipe setup.

I'll give Terry a call.

This One

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 02civicHB &raquo;</TD></TR><TR><TD CLASS="quote">Thanks for the quick reply Matt. I still want the Manifold, down Pipe & I guess dump pipe setup.

I'll give Terry a call.</TD></TR></TABLE>

No problem, Thank you

This One

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gelok &raquo;</TD></TR><TR><TD CLASS="quote">Hi... can you please tell me where the wastegate will be located with this non AC manifold? I'm very interested. Thanks </TD></TR></TABLE>

Sorry about that
Unfortuanly out of all the Manifolds Ive built ive yet to take Pics of this that are worth posting.
but for the time being here are some that reference what your asking, not the best pics.

Boostfed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by This One &raquo;</TD></TR><TR><TD CLASS="quote">

Sorry about that
Unfortuanly out of all the Manifolds Ive built ive yet to take Pics of this that are worth posting.
but for the time being here are some that reference what your asking, not the best pics.

</TD></TR></TABLE>


Thanks Matt!

Boostfed

Eduardo

Let me know what you want to do, the mani is fine, the dp is what we are worried may need some tweaking if it isnt dead on since we dont have a chassis to fit it on sir.

Boostfed

Bump to the TOP!

k20whitevic

Any chance for an update?

This One

Hey shawn, Im building a K series setup that i wanted to mock your DP off of.
This setup should be down tuesday/wednesday along with your DP.

k20whitevic

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by This One &raquo;</TD></TR><TR><TD CLASS="quote">Hey shawn, Im building a K series setup that i wanted to mock your DP off of.
This setup should be down tuesday/wednesday along with your DP.
</TD></TR></TABLE>

Matt, You're a god in my eyes.

kordenbrock motorsports

could i too get an update on my mani? i am getting antsy in my pantsy's... thanks guys,
brett kordenbrock

White Smoke

Good things come to people that wait

This One

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by brettII &raquo;</TD></TR><TR><TD CLASS="quote">could i too get an update on my mani? i am getting antsy in my pantsy's... thanks guys,
brett kordenbrock</TD></TR></TABLE>

Hey brett&lt; i got your Email as Well.
Sorry for the Delayed Response.
anyways I should have your manifold Finished up over the Weekend for ya.

kordenbrock motorsports

awesome, just wanting to keep in touch. both you and terry have been great at keeping me posted and communicating with me. thanks again,

brett