KTeller8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueShadow &raquo;</TD></TR><TR><TD CLASS="quote">
I request the front and rear flanges be welded in place instead of having the flared ends with the moveable/rotateable flanges? No, we do them with the rolled edgeds that way you can assure a better fitment. this way you can have the cat at its flatest point. if not some ppl have problems. from shiftlinkate to rubbing cause its angled, etc.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">
I was wondering what type flanges you normally use. ]

DOUBLE EDIT: also I see that you sell the WG flange, but you dont sell WG piping do you? </TD></TR></TABLE>

we dotn flange them , unless you order them flanged:

we sell wg flanges but we dont prefab dumbtubes.. youll need to do that on the car. we have the bends and materials do to that properly.

Thanks

KTeller8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bottle fed &raquo;</TD></TR><TR><TD CLASS="quote">hey im going to be buying your slip on kit for 96-00 hatch and I want to know if you know where to buy a apexi n1 rear bolt on. because i like the way it looks. but I need 3 inch. please help</TD></TR></TABLE>

i dont believe apexi makes an axleback. you can buy the universal muffler from us and have that installed.

DigitalFusion

price on a 3" mild steel cat-back bolt up for 95 civic coupe w/your cheapest 3" magnaflow muffler?

KTeller8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DigitalFusion &raquo;</TD></TR><TR><TD CLASS="quote">price on a 3" mild steel cat-back bolt up for 95 civic coupe w/your cheapest 3" magnaflow muffler?</TD></TR></TABLE>

pm'd

1.8EG-T

Bump for a great exhaust and an even better seller.

KTeller8

Thanks for the bumps

mrchris1979

Damn, I just got my 2.5" cat back exhaust done on my CRX. For what I paid, I would have much rather bought your stainless kits. They do good work, but my bends aren't as smooth and clean as your kits, they did nott have a mandrel bender. I would have bought your kit without a doubt if I had caught this post first, oh well, I'm glad to finally see some quality products around here. I will have to make plans for a 3" upgrade in the future. Anyway, do you have plans of selling pre-fabricated turbo downpipes for Hondas in the near future? Lets say a B18, CRX with a specified turbo manifold. Even if you just had the bends done and I can get the flanges welded on that would be excellent. Let me know, PLEASE.

BlueShadow

Heya Mike,

I sent you an e-mail and IM about my order.

Thanks

kyden

ordered my bolt up kit and cat.. excited.. hehe

KTeller8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kyden &raquo;</TD></TR><TR><TD CLASS="quote">ordered my bolt up kit and cat.. excited.. hehe</TD></TR></TABLE>

great, thanks again

tub_sephiroth

Check PM.

KTeller8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tub_sephiroth &raquo;</TD></TR><TR><TD CLASS="quote">Check PM.</TD></TR></TABLE>

replied, thanks!

tub_sephiroth

I didn't get your PM.

kyden

i got my 3" bolt up system.. excellent piece..

Tchleung

Got my exhaust today. Everythnig looks great but it's missing a small peice for the rear axle back portion.a dn also missing a resonator :crooked: Kteller8, please check IM asap

civicvtecb16a

Hi

Interested in what you offer in 3" for a EG hatchback, Can you PM me all my options or post here?

I will need it from Cat back and including a test pipe and some kind of resonater or box?

Thanks
Matt

KTeller8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Tchleung &raquo;</TD></TR><TR><TD CLASS="quote">Got my exhaust today. Everythnig looks great but it's missing a small peice for the rear axle back portion.a dn also missing a resonator :crooked: Kteller8, please check IM asap </TD></TR></TABLE>

pm' sent. remember the Da uses horiztonal muffler. which connects to the 2 90's we sent you~

thanks

KTeller8

Tchleung

Woo. Fast responses and quick to deal with the problem at hand. Still highly recommended as always!!!

mrchris1979

Hey KTeller8, will there be a complete 3" catback or 3" bolt up catback piping kit available for the CRX anytime soon or possibly have one made to order in mild steel. I'm still debating between the 3" Thermal or a Kteller but I do not want the hastle of looking for a good quality welder locally (they just don't seem to exist around here). I also plan on jet coating the pipes and with the Thermal's polished finish I feel that I'll be wasting quality and of course cash. I especially like the option you have with adding the resonator on your available catback kits. Let me know what you can do. I have about 2 weeks before I send a payment to you or a Thermal.

StockBlockRob

are you guys ever going to return my emails or phone calls? my order has been lost for almost a week and still no response from you guys

Tchleung

It was the long weekend.. I'm sure they were clsoed since Friday. Mike always coems through. Don't worry man he won't up leave you hangin.

KTeller8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vtecrob16a &raquo;</TD></TR><TR><TD CLASS="quote">are you guys ever going to return my emails or phone calls? my order has been lost for almost a week and still no response from you guys </TD></TR></TABLE>

pm me with your order number and name so we can find out who and what you ordered. HT SN's dont help us much.. also you can check your history for all tracking information~

GAP

PM'd you with order #...lmk ..thanks

KTeller8

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GAP &raquo;</TD></TR><TR><TD CLASS="quote">PM'd you with order #...lmk ..thanks</TD></TR></TABLE>

thanks you got reply~