I want to purchase the z10 catchcan but z10 never answers the phone or returns my calls. Who is a distributor for these that can get me one quickly?

 

bump cause i need one too.

 

PM..nolimitmotorsports...i believe he still has some

 

Why not just go with the Endyn one, those are easy to get.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BodyKits NW &raquo;</TD></TR><TR><TD CLASS="quote">Why not just go with the Endyn one, those are easy to get. </TD></TR></TABLE>

Thats what i just purchased
http://www.theoldone.com

 

If I wanted a morosso catch can I would just go here:

http://store.summitracing.com/...h.asp

 

What I'm mainly interested in is finding a breather tank that has 2 inlet ports. I need these ports to either be 1/2" NPT or -10 or -12 AN.

Justin

 

Yah I can understand that if you just wanted your basic moroso can, but Endyn's can is no ordinary moroso lol. The unmodified moroso doesn't even have any ports on it, while the endyn one does.

 

Try Boosted-hybrid aka Jeff Evans, I purchased mine from him.

 

D.R.T check my sig

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Justin Olson &raquo;</TD></TR><TR><TD CLASS="quote">If I wanted a morosso catch can I would just go here:

http://store.summitracing.com/...h.asp

</TD></TR></TABLE>

The Endyn can is just the same Moroso Can but with two 3/8" NPT ports predrilled into the side. I dont think any of the Moroso cans on summit have two ports. There is that one can that is longer and has two -12AN male ports, however you'd want to run -10 AN lines cause that's what size the Honda block fittings are (the ones that go behind the block).

A -12 AN female to -10 AN male reducer is about $17 each from summit. From there you can run a -10 AN reusable hose end to an SS or vinyl reinforced line. Or you can run a -10AN hose end with a -10 AN barbed end. I dont know if they make -12 AN female to -10 AN male barbed or -12 AN female to -10 AN hose ends.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Justin Olson &raquo;</TD></TR><TR><TD CLASS="quote">What I'm mainly interested in is finding a breather tank that has 2 inlet ports. I need these ports to either be 1/2" NPT or -10 or -12 AN.

Justin</TD></TR></TABLE>

Try this one Justin. It is new for this season (well seeing as it is almost over now). Scroll down to the bottom of the page: http://www.moroso.com/catalog/...13400

Jason

 

where can i get a endyn one?
a sponsor here should start selling this. that be great

 

http://www.theoldone.com

 

LoL, I called Z10 back in October, they answered right away and I placed my order and got it in 3 days, excellent service IMHO. Maybe they are on vacation or something.

 

arturbo sells the endyn can

 

i could never spend that much on a catch can

 

It wasn't that much, came out to like 175 shipped, and it comes with everything you could possibly need, billet block plug, 2 block fittings, hose, clamps, really nice looking catchcan. I thought it was the most complete kit and looked the nicest, so I just got it. It's not like I make a lot of money either, I can only really afford little stuff like this, it's gonna take me a really long time to save up enough for a new turbo setup, wonder if full-race is going to have any good sales around when I get my tax refund

 

ebay owns joo all http://cgi.ebay.com/ebaymotors...QrdZ1

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITSME4G63 &raquo;</TD></TR><TR><TD CLASS="quote">ebay owns joo all http://cgi.ebay.com/ebaymotors...QrdZ1</TD></TR></TABLE>

those are a bit different
no return line, no filter on tip either

 

http://store.summitracing.com/...w=sku

For the moroso link above. I'd still have to say that would be cheaper. Bigger and needs more work/parts, but for half the price of endyne's breather setup...