turbospool

I just ordered my Rev Hard Stage 2c kit from afterhourz performance.

2824.95 2C Kit
30.00 for non a/c cast iron tubular upgrade
110.00 for HKS Bov w/ flange upgrade
85.00 for Tial 35mm wastegate upgrade
Polished intercooler - YES

Currently there is about 1 week wait on that kit, you may contact Rev Hard to verify this 818-764-4312, we just want to make sure that you are aware of that.

Total - 3049.95 Shipped in the 48 continental US states



i was wondering how the quality of the rev hard kits are. like piping lineing up, lengths of stuff etc. thanks. any comments? haha

RyanAutry

I also ordered the exact same kit you did.

But if I were you, I wouldn't upgrade the wastegate. Stick with the Turbosmart that the 2C kit comes with and save yourself $85.

turbospool

haha too late. they already sent me tracking numbers for the bov and w/g. plus i like the blingbling tial more. HOw did all the piping fit in your kit>?

CzanSOHC

IMO the tial is worth every penny.

RyanAutry

I haven't installed the kit yet. The piping looks "OK" but nothing special.

The Precision Turbo ownz though.

The oil return line is shady. I replaced it with a stainless steel line and earl fittings.

The clamps are junk. I got t-bolt clamps

They sent me the wrong manifold, so I'm waiting for my Iron/Tubular to come.

I just sent the turbo back to precision. I traded the SC50 for a SC34.

RyanAutry

I agree. I also went with a Tial upgrade with my 2C kit. But that was before Rev Hard came with Turbosmart Upgrades. So I don't want to take anything away from Tial.

But, IMO the tial is not worth an $85 upgrade over the turbosmart. Plus the turbosmart 35mm can support 600hp.

turbospool

what is the code for Precision t3/60-1? How much would it cost to trade the turbo that comes iwth the 2c for that one? Would it fit with the cast/tubular manifold that comes with the 2c? thanks.

RyanAutry

If you want a t3/60-1. That is equivalent to the SC61 with T3/T04S housing.


SC50-425hp
SC32-480hp
SC34-545hp
SC44-565hp
SC60-580hp
SC51-585hp
SC52-600hp
SC53-610hp
SC54-620hp

SC61 in the following:
T4/T04S
T4/T04E
T3/T04S
T3/T04E

RyanAutry

I'm sure Ron @ precision will trade it out for you. For me, he traded it for free.

Except I paid all shipping charges.

You got the cast/tubular or the Iron/Tubular?

turbospool

i have the cast tubular, u think it would fit?

RyanAutry

I duuno.

DIRep972

iTrader: (1)

actually Ryan, the 60-1 is not equivelant to a SC61. the SC61 is a much much larger wheel then a 60-1. the wheel in the SC61 is a GT40 wheel and is rated to flow 60-63lbs/min(about the same as a T61 ). a 60-1 wheel flows 57lbs/min. If u want the equivelant of a 60-1, but you wanna go through precision to get the nicer housings and all that go w/ the SC60. It actually uses a 60-1 wheel, and u have the option of either T04e or T04s housings to fit space requirments. hope that helps

RyanAutry

move_right

sounds like a lot of crap to deal with.... getting the wrong parts, trading stuff in for other stuff. why not just figure out what you wanted, and order the proper stuff?

avividmemory

how much does the turbosmart 35mm usually retail for??

RyanAutry

Well unfortunalty you don't have the option to upgrade the turbo, clamps, ect.

RyanAutry

Retail's like $299.

They're on sale for $225 shipped.

Danger

happen to have a pic of that ?

RyanAutry

https://honda-tech.com/zerothread?id=415665

Danger

thanks dude

Tru Dynamix

anyone have a picture of the revhard piping?

RyanAutry

turbospool

ryan, did you have any problems with the rev hard piping and intercooler mounting fitment? I heard rev hard wasnt that good, but i cant wait till all my **** comes. afterhourz shipped out my tial w/g and hks ss bov and they are in IL right now. haha. thanks.

RyanAutry

I don't know yet. I haven't installed the kit yet. Waiting on my turbo from Precision.

I also heard they weren't that good. But I'm not worried, really.

TurbothisLS

i like the revhard piping better than the drag
drag is too bling