.


[Modified by RATEDR, 12:21 AM 9/10/2002]

 

Mine probably hits around 4000 with a t3/to4b on a b16a2. No cat, and a Tanabe RM...I need 3"!!!

 

mine hits full boost around 3.5k and then it really hits you at about 6k.

 

i hit full at 4k but really pulls at 5k

 

.


[Modified by RATEDR, 12:22 AM 9/10/2002]

 

mine hits full around 4000-btw TJ, the front mount looks tight y0!

 

now when you guys are saying you hit full boost in a certain rpm, which gear would this be in?

 

Try this out: go about 30miles/hr and put it in 5th. Give it full throttle and let the boost climb slowly and once it reaches full boost then look at your tach to see where you reach full boost.

art

 

is that like the "official" way to check?

 

And suddenly......"Oh ****! I'm going 120 and havn't even hit full boost yet!"

 

is your wastegate opening up early? are you running a boost controller?

 

ROLMAO!!
deng mah bro just finsihed his turbo setup and is only boosting 4psi on a GSR until he finsishes all da little stuff on his setup... He took me for a ride today... Barely Boosted... all i could say was WOW!!

I can't even drive yet and i got boost bug!!

 

I hit full boost at 1000 rpm = 10psi

 

LOL, with the JRSC.

 

wouldnt that put a lot of stress on the engine?

 

I hit full boost at around 4000 and change rpms, wastegate starts dumping hard at 5000rpm, and the car pulls from 3500-redline.

I have a t3/t04e .53 a/r compressor housing, and STOCK EXHAUST!!! no bc or anything like that, just my dependable tial with .45 bar spring in her chrome sexy ***.

 

Full boost by 4000 rpm @ 10 PSI

B18A
T3/T04E
3" exhaust

 

I hit full boost at 3500-4000. 2.5" DP. 2.25 exhaust. t3/t4 .50a/r