what is u're AVC-R settings for boost Duty Cycle??
#1
Thread Starter
Join Date: Oct 2002
Location: TurBo Valley, USA
Posts: 3,017
Likes: 0
Received 0 Likes
on
0 Posts
what is your AVC-R settings for boost Duty Cycle??
Aright, for those ppl who are using the Apexi avc-r, what is your settings for boost duty cycle? I had it set at 30% (from 3K rpm to 6500) but it just took too long to reach full boost. I recently up the boost duty cycle to 50% and it felt great (hit full boost in first gear, 10psi). I wanted to know what everyone's settings were bc I was thinking of turning the boost duty cycle up more if it would help me reach full boost faster.
Modified by Mr.DC2TurBo at 5:28 PM 4/24/2004
Modified by Mr.DC2TurBo at 5:28 PM 4/24/2004
#2
u're?? WTF?
First of all, it should be you're.
Second of all that is short for you are. You're looking for "your."
All in good fun.
In terms of the AVCR: The main problem you are looking at is the tradeoof between boost response and spike. If I were you, I would tune it to give you a little bit of spike when you punch it at a higher rpm. That will give you the best boost response, without the spike blowing stuff up.
First of all, it should be you're.
Second of all that is short for you are. You're looking for "your."
All in good fun.
In terms of the AVCR: The main problem you are looking at is the tradeoof between boost response and spike. If I were you, I would tune it to give you a little bit of spike when you punch it at a higher rpm. That will give you the best boost response, without the spike blowing stuff up.
Thread
Thread Starter
Forum
Replies
Last Post