what are your experiences with wiesco/arias pistons?
#1
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: ILL state
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
what are your experiences with wiesco/arias pistons?
building a Ls/Vtec motor and Found some prety good deals on both Arias and weisco pistons.
This is a semi budget build soo im looking for good numbers with some cash left in the wallet, If anyone knows of any shortcommings of either of these products please let me kno.
This is a semi budget build soo im looking for good numbers with some cash left in the wallet, If anyone knows of any shortcommings of either of these products please let me kno.
#2
Honda-Tech Member
iTrader: (1)
Join Date: Mar 2003
Location: I drink Seafoam and poo into catch cans, USA
Posts: 3,215
Likes: 0
Received 2 Likes
on
2 Posts
Re: what are your experiences with wiesco/arias pistons? (JDMB20TDA)
You should search first!!!
I give to arias!!
Mine survived a cracked sleeve to be used again in my current motor.
From what I've read, they run one of the closest piston to wall clearances which is good!!
I give to arias!!
Mine survived a cracked sleeve to be used again in my current motor.
From what I've read, they run one of the closest piston to wall clearances which is good!!
#3
Honda-Tech Member
Join Date: Mar 2003
Location: here n there n everywhere
Posts: 5,661
Likes: 0
Received 0 Likes
on
0 Posts
i like wiseco, my last setup using arias had piston slap like a ****... coulda been the engine builders fault who knows but the wiseco have no slap
#5
Honda-Tech Member
Join Date: May 2004
Location: Baltimore, MD, US
Posts: 2,625
Likes: 0
Received 0 Likes
on
0 Posts
Re: what are your experiences with wiesco/arias pistons? (mike1114)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mike1114 »</TD></TR><TR><TD CLASS="quote">
I give to arias!!
</TD></TR></TABLE>
I give to arias!!
</TD></TR></TABLE>
#6
Very Emergency!!
Join Date: Dec 2003
Location: ....Things Just Getting Good..... Reno, NV
Posts: 3,666
Likes: 0
Received 0 Likes
on
0 Posts
Re: what are your experiences with wiesco/arias pistons? (JDMB20TDA)
i bought eagle rods/wiesco piston setup from http://www.nolimitmotorsports.com in new york. i have had this setup for about 5000 miles (hard miles also) with no problems at all.
wiesco ftw!!!!
wiesco ftw!!!!
#7
Honda-Tech Member
Join Date: Jan 2003
Location: A Place in, Florida, USA
Posts: 7,277
Likes: 0
Received 0 Likes
on
0 Posts
Re: what are your experiences with wiesco/arias pistons? (JDMB20TDA)
No experience with Arias. I have had experience with Wiseco though. No problems. Vince Tiaga / Mazda 3 Racer swears by Arias though
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: ILL state
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Re: what are your experiences with wiesco/arias pistons? (0x64)
damn thanks guys. how bout cp pistons? thats what most my buddys rock, little pricer that the others but NEVER any problems from what Ive seen.
#9
Honda-Tech Member
Re: what are your experiences with wiesco/arias pistons? (JDMB20TDA)
Using Arias w 450 whp. No problems. Heard that rings were propriatary. Only Arias rings can be used with their pistons?
#10
Honda-Tech Member
Thread Starter
Join Date: Mar 2006
Location: ILL state
Posts: 1,507
Likes: 0
Received 0 Likes
on
0 Posts
Re: what are your experiences with wiesco/arias pistons? (purpleh22)
wel they come with the rings soo i dont think that would be a problem, thanks any more experiences
Thread
Thread Starter
Forum
Replies
Last Post
.adam.
Forced Induction
26
11-21-2007 02:39 PM
Kid_Frost
Honda Civic / Del Sol (1992 - 2000)
5
01-17-2007 10:38 AM
DC-4-Drew
All Motor / Naturally Aspirated
1
07-25-2005 08:30 PM