What pistion rod setup?
#1
Member
Thread Starter
What pistion rod setup?
Well here is the situation I am looking to order pistons and rods really soon for my B18a turbo and was wondering what setup is a common and worth it setup to buy? My goal will be to be boosting at least 10psi daily so with your guys help I might be able to do this. It would be the 1st boosted LS in my town
#3
Honda-Tech Member
Re: What pistion rod setup? (b18bturbo)
i got a set of brand new Arias 9.8:1 with rings, pins and locks for your ls ready to roll if you want em . PM me for info , ill let em go cheap .
#4
Honda-Tech Member
Join Date: Jun 2000
Location: NJ, USA
Posts: 917
Likes: 0
Received 0 Likes
on
0 Posts
Re: What pistion rod setup? (b18bturbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18bturbo »</TD></TR><TR><TD CLASS="quote">eagle rod and 8.8 je piston
</TD></TR></TABLE> hahaha...classic
</TD></TR></TABLE> hahaha...classic
#5
Honda-Tech Member
Re: What pistion rod setup? (b18bturbo)
Jeez, thats old as ****. I remember everyone had that in their sig. Something like wheres the other 3 eagle rod and JE 8.8
Ha! The good ol' days
To the guy who posted the thread. I would go with ITR206's pistons. I like higher compressions, especially in LS turbo's where torque is there even under vacuum--it'll just pull that much more til boost comes on.
Ha! The good ol' days
To the guy who posted the thread. I would go with ITR206's pistons. I like higher compressions, especially in LS turbo's where torque is there even under vacuum--it'll just pull that much more til boost comes on.
#6
Honda-Tech Member
Join Date: Oct 2000
Location: Dallas/Miami, FL, USA
Posts: 11,155
Likes: 0
Received 0 Likes
on
0 Posts
Re: What pistion rod setup? (93LSivic)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93LSivic »</TD></TR><TR><TD CLASS="quote">Jeez, thats old as ****. I remember everyone had that in their sig. Something like wheres the other 3 eagle rod and JE 8.8
Ha! The good ol' days
To the guy who posted the thread. I would go with ITR206's pistons. I like higher compressions, especially in LS turbo's where torque is there even under vacuum--it'll just pull that much more til boost comes on.</TD></TR></TABLE>
At least someone got it.. i am getting too tired of honda-tech lately.
Ha! The good ol' days
To the guy who posted the thread. I would go with ITR206's pistons. I like higher compressions, especially in LS turbo's where torque is there even under vacuum--it'll just pull that much more til boost comes on.</TD></TR></TABLE>
At least someone got it.. i am getting too tired of honda-tech lately.
#7
Honda-Tech Member
Join Date: May 2001
Location: bay area/socal, CA, USA
Posts: 3,858
Likes: 0
Received 1 Like
on
1 Post
Re: What pistion rod setup? (b18bturbo)
lol someone find that thread in the archives. Wasnt it like 6 pages long and the whole time it was just someone messin around?
I need an eagle rod and je 8.8
I need an eagle rod and je 8.8
Thread
Thread Starter
Forum
Replies
Last Post
AnToNy
All Motor / Naturally Aspirated
8
05-08-2006 08:08 PM