What numbers can I expect with this setup?
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 723
Likes: 0
From: CA, United States
What numbers can I expect with this setup?
I have an 92 H22A. I'm running an FMAX turbo kit with Tial35mm(.8bar)
Internals:
Ross 8:1 Pistons
Eagle Rods
AEBS T-Sleeves
Ignition:
Blaster SS Coil
MSD 6AL
Fuel:
B&M FPR
Walbro 255LPH Fuel Pump
DSM 440cc injectors
Exhaust:
2.25in. piping...soon to change over to 3inch.
ECU:
P28 w/Stage 2 hondata
I'm going to be start breaking it in this weekend hopefully...I just want to know what #'s I can expect once I get it tuned.
Internals:
Ross 8:1 Pistons
Eagle Rods
AEBS T-Sleeves
Ignition:
Blaster SS Coil
MSD 6AL
Fuel:
B&M FPR
Walbro 255LPH Fuel Pump
DSM 440cc injectors
Exhaust:
2.25in. piping...soon to change over to 3inch.
ECU:
P28 w/Stage 2 hondata
I'm going to be start breaking it in this weekend hopefully...I just want to know what #'s I can expect once I get it tuned.
Honda-Tech Member
Joined: Jun 2002
Posts: 4,169
Likes: 0
From: Burlington, WI, USA
Re: What numbers can I expect with this setup? (teameracer3)
just a friendly piece of advice, bench racing/bench dyno'ing around here is kinda looked down upon and it gets annoying as everyone wants to "guess" what their car would run or put-down. Go get it dyno'd. 
mike
mike
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 723
Likes: 0
From: CA, United States
Re: What numbers can I expect with this setup? (envision2teg)
I do plan on getting it dyno tuned...so I will find out the exact numbers...I just wanted to hear how much I should/shouldn't expect to put out...or maybe get a number based on what other people have put out with a similar setup. I guess I'll just wait till I get dynoed...thanks anyways.
Thread
Thread Starter
Forum
Replies
Last Post
Pandahatch
Forced Induction
5
Feb 2, 2008 02:27 PM