DIS-1

And 1/4 and 1/8 track times? Thanks

boostedcivicsir

my old drag kit, 9:1 6 psi pig rich fmu i know i know, this was 5 years ago, made 230 and went 14.0 @ 107 open diff and street tires.

Outkast95LS

iTrader: (1)

On my LS-T @ 6psi, i ran 13.7@103 on street tires. No dyno tuning.. just 20 minutes of street tuning. No dyno #'s, but i estimated close to 200whp.

DIS-1

Just dynoed at Buba's Do it Dyno, made 238 hp and 166 tq on 6psi Type R motor , no track times yet

blackeg

i made 261whp at 7 pounds on an lsvtec

DIS-1

bump

DIS-1

spooledex

I made 310 at 8psi on a stock bottom LS vtec To4B turbo setup with FMU I ran 8.0@95 on drag radials. A/R were like 14.2 though. Depends on way too much. I would say possibly mid 13's on any setup. I ran a 13.6@106 with 7 psi on a JDM GSR motor in a 98 ex.

sc4dr

hmm

boosted k20

B16 stock motor w/ ram horn manifold and pretty small turbo, 4got what size. on 5-6 psi it made 224whp and i think 157ft-lbs

GSR with drag kit on 6 psi with edlebrock IM 229whp and 168 ft-lbs (only rev n to 8K, power was still climbing)

WHITFIELD-TUNED

Just tuned a b16 on 6psi with <crome> tuned it to 12.1 AFR (on the safe side for low boost) 239.9hp 161 tq

DIS-1

oscarmayer

well at 7.5 ( i know it's not 6 but that's the lowest my wg spring goes) my D16 made nearly 250 wheel power and 200 ft torque. (6k rpm only)

SC-50 BB turbo.

urbansi

Greddy 18g kit, 7psi, blue box, 2 1/4 inch exhaust with stock cat and street tires car went 14.1. estimated hp around 185-190.

DIS-1

any track times?

DIS-1

WHITFIELD-TUNED

Another one for you guys ..tuned today on AEM EMS
99 si WhitfieldRacingInc custom turbo kit gt35r turbo 6psi 347hp .....turned it up to 13.5psi 426hp... Gonna run 24psi on race gas hoping for 550hp ... And this is through a complete exhaust.......
Chris Whitfield

DIS-1

Thats some crazy horsepower for 6psi. Is this car going to be at the Fontana event, Do you dyno no a Dyno Jet? Also how much for a dyno tune? Thanks

oscarmayer

I serously doubt he is at 6psi and making that power. more like 9 or 10 psi.

DIS-1

WHITFIELD-TUNED

I tune 4-5 cars a day on my dynojet and this si was a b20 vtec 85mm sleeves ported head with our custom turbo kit..... And for the other not rude post yes I believe the customer is bringing the car to fontana hopefully it will be on 20+ psi


Modified by WHITFIELD-TUNED at 1:28 PM 7/9/2006

DIS-1

I wanted to get my car tuned if you have time? and how much? You can reach me at 714 458-0329 Thanks

WHITFIELD-TUNED

Do you have AIM its the easiest way to get a hold of me my aim name is in my signature

DIS-1

called, they said to call monday

WHITFIELD-TUNED

kool it monday i be here