what all will i need
#1
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
what all will i need
ok i am looking to turbo my 96 civic this summer i am just trying to get an idea of everything i will need to do this i know what i will need in gen. but like the little things i will need anyway hope you guys can help i am wanting to run somewhere between 10-15lbs of boost
i have a JDM B16a with ITR drive line skunk2 gears and skunk2 intake manifold and ITR pistons i will change out to 9:1 compression MSD A6 ign. AEM fuel rail and reg. with RC310 injecters.
i have a JDM B16a with ITR drive line skunk2 gears and skunk2 intake manifold and ITR pistons i will change out to 9:1 compression MSD A6 ign. AEM fuel rail and reg. with RC310 injecters.
#4
Honda-Tech Member
Thread Starter
Join Date: Feb 2006
Location: Ankeny, IA, US
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
Re: what all will i need (jdmhonda)
yea i know i dont have to lower it that much lol i would like to run high boost but i need to keep it real so i'll peob run like 9.7:1 then like 12 or 15lbs..
i know i need a kit but i know the basics of what i need..
i dont know if i want to buy a kit of build one i am not really concerned on how much it will cost cuz i will be slowly building the motor and turbo this summer i want it to work and look good .. i have been looking at the Rev Hard kits or the Greddy kits i just dont know what one is going to offer the best out put i have been doing some reseach on them i have heard that the Rev Hard kits have bad turbo lag after time but thats just something i have heard..
well i guess what i am lookin for right now is a shopping list of the things i will need and i dont want to make it ghetto or slopy..... gotta love a clean engine bay..
Thanks guys
i know i need a kit but i know the basics of what i need..
i dont know if i want to buy a kit of build one i am not really concerned on how much it will cost cuz i will be slowly building the motor and turbo this summer i want it to work and look good .. i have been looking at the Rev Hard kits or the Greddy kits i just dont know what one is going to offer the best out put i have been doing some reseach on them i have heard that the Rev Hard kits have bad turbo lag after time but thats just something i have heard..
well i guess what i am lookin for right now is a shopping list of the things i will need and i dont want to make it ghetto or slopy..... gotta love a clean engine bay..
Thanks guys
#5
Honda-Tech Member
Re: what all will i need (JDM_EK_621)
turbo
manifold
downpipe
dumptube
waste gate
blow off valve
intercooler pipping
intercooler
6 couplers
12 clamps
oil return lines
bar map
RC 440/550 CC Injectors
boost gauge
temp
optional other gauges and electronics
thats should cover ever thing for a more than complete kit
boost controller
turbo timer
engine mangement (Crome, Neptune, etc)
manifold
downpipe
dumptube
waste gate
blow off valve
intercooler pipping
intercooler
6 couplers
12 clamps
oil return lines
bar map
RC 440/550 CC Injectors
boost gauge
temp
optional other gauges and electronics
thats should cover ever thing for a more than complete kit
boost controller
turbo timer
engine mangement (Crome, Neptune, etc)
Thread
Thread Starter
Forum
Replies
Last Post