purehonda

Ok, I have a 00 gsr and I'm looking into the vortech s/c, but I already have a skunk2 IM. Is there any problems with this setup or would I need to revert back to my stock IM? I searched and came up with nada on this specific topic, so any info is

wantboost

iTrader: (2)

should position everything in the same place

95civ

yeah...fitment shouldn't be a problem.

dc2legend

Well doesn't the Skunk2 mani put the TB up higher like an ITR/B16? Only problem is that, but it shouldn't be too big a deal to fit that in.

dategb16vortech

vortech civic si kit should fit perfect with your skunk2 manifold, otherwise if you want to go back to stock gsr you would have to get the gsr engineered kit

N20civicB18

do they sell a kit for the type-r? that would bolt right on

dategb16vortech

both my kits will fit a type-r, b16a and type-r heads are made in the same casting

631 Teggy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by N20civicB18 &raquo;</TD></TR><TR><TD CLASS="quote">do they sell a kit for the type-r? that would bolt right on</TD></TR></TABLE>

Yup. ITR kit.

dategb16vortech

I checked part numbers and they are the same 4 b16a and type-r

dategb16vortech

got Supercharger Package deals going FS, here goes:
used but very good condition 99-00 civic si b16a or type-r Jackson Racing Supercharger
10 psi stepper pulley
lightweight aluminum AASCO 8 LBS Flywheel
Brand New 99-00 Civic SI Endless Brake Pads (Front)
and a Brand New Hondata Intake Manifold Gasket
$1400 OBO PRICE LOWERD and I am very willing to consider good offers but no trades unless you have a Peakboost Turbo Kit

I also have a used Vortech Supercharger High Output Kit for the b16a 99-00 civic si or type-r, same kit
with aftercooler
greddy type-s blowoff valve
I have the standard 8 psi pulley or a custom 15 psi pullley
b20 crank pulley
kamikaze header with 2.5" down pipe (heatwrapped and coated, also has extra O2 bung for wideband tuning)
Custom 2.5" to 2.25" test pipe
All belts to run the 15 PSI Pulley (Alt, Blower and Power steering Belts)
Brand New HKS Mega Flow Filter (100 mm (BIG))
Tapped and welded Oil pan with Oil return Fitting
and a brand new MSD 6 AL Igniton with SS Blaster coil and coil wire

$2900 OBO PRICE LOWERED on the Vortech

Both Kits have all the directions for instalation and are as good as new
please call at 952-201-6063 with any ?'s or concerns you may have, My name is Jon

dategb16vortech

bump, still got chargers for sale although they are on ebay now