B18C1CYA

man thats large , lol who makes the T3/T71 ????

White Smoke

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbotypeR &raquo;</TD></TR><TR><TD CLASS="quote">
the two bottom rear lines go to the back of the block.they act as a vent until the can fill to their level and then it acts as a drain</TD></TR></TABLE>

Nice! How high are the lines from the bottom of the can? Just curious, I don't really think it would matter. Did Tony1 make this stuff for you or did you make the can and headlight setup yourself?

turbotypeR@SPEC

the turbo was made by turbo specialties

i made everything on the car

Autoworks

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbotypeR &raquo;</TD></TR><TR><TD CLASS="quote">the turbo was made by turbo specialties

i made everything on the car</TD></TR></TABLE>
The one in AL? I just pulled that card out my wallet the other day, probably been in there for 5 years.

sp00led

Definantly a badass sfwd setup. Does Ed usally do the tunning for your car? I had heard a few negative things in the past but I guess the numbers speak for themselves.

Make sure you post up the next time you plan on running this thing. I would like to see this car make a few passes.

Roll Tide

0Lightning Orders

Awesome setup man. I remember seeing this car in person in Montgomery at IFO, very clean car.

turbotypeR@SPEC

yes,ed has been doing the tuning on the car.he is the best there is.i usually let him do the base tune on it and i do some tweaking myself as i change things.i just can't affors $150/hr as many times as i need it done.

yes,i am talking about the turbo specialties in alabama.he works a regular job now and does limited turbos on the side.he is a very good friend and has been really good to me

B18c1turboedEK

iTrader: (1)

WOW car looks good!!

Ed told us you where in Atl getting tuned, give me a call next time.Ill take you to lunch!!

turbotypeR@SPEC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by B18c1turboedEK &raquo;</TD></TR><TR><TD CLASS="quote">WOW car looks good!!

Ed told us you where in Atl getting tuned, give me a call next time.Ill take you to lunch!! </TD></TR></TABLE>
cool.i'll take you up on that!

turbotypeR@SPEC

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by White Smoke &raquo;</TD></TR><TR><TD CLASS="quote">

Nice! How high are the lines from the bottom of the can? Just curious, I don't really think it would matter. Did Tony1 make this stuff for you or did you make the can and headlight setup yourself?</TD></TR></TABLE>
the lines are as low in the can as possible

gitwidit

Very nice setup and #'s What kinda gas are you running? How much psi did it take to break 700whp with that turbo?

turbotypeR@SPEC

i am using c16 and 35psi

still_slow

Only 735whp man those are some sick numbers

4rc-fed

Bama

150mph traps

turbotypeR@SPEC

thanks guys!

SpeedDreamz.com

I had the car on the dyno yesterday and believe the ignition problems are now solved. Kept blowing the tires away at high boost. The drag radials he used are worn out. Good luck to Danny, the car should fly.

Boosted B6teen

Damn dude, nice set-up Im lovin the ram-air headlight intake