I threw code 18...ain't that a bitch!!! WTF is 18? Either way, I pulled the battery terminal off and it reset the ecu and knocked off the CEL.

-Setup-
Boosted b18b
Hondata/s200b
P75ecu

Khoi

 

Search owns you: http://www.c-speedracing.com/faq/05.php.

BTW, there is no code 18, so you must have read it wrong.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cornbread Jr. &raquo;</TD></TR><TR><TD CLASS="quote">Search owns you: http://www.c-speedracing.com/faq/05.php.

BTW, there is no code 18, so you must have read it wrong. </TD></TR></TABLE>

BTW....already searched!!! Thats why the name of this thread is Un-identified CEL! And no I didn't read it wrong...why the **** do you think I posted it? Because I was an idiot and didn't know to look it up in my Helms manual?

Khoi

 

Wy are you getting all salty. You're the one who has the only CEL #18 in Honda history. Maybe you should call the corporate office and let them know to add a code 18 to the books. Or it might be 2 codes flashing or you just read it wrong. Either way it's obviously not an 18 because that code doesn't exist.

 

Its very possible that I may have a ghost code..people do have those. Just trying to figure out if anyone else has had that before. And no I did not read it wrong.....1 long flash and immediately following 8 short flashes. No pause inbetween the two flashes.

Khoi

P.S sorry didn't mean to sound like an ***...just kinda took it the wrong way I guess. I did search and was stumped..which is why i posted it.

Khoi

 

That's cool. I guess I'd be pissed if I threw a code that didn't exist .

 

that sucks. CEL owned me too

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Cornbread Jr. &raquo;</TD></TR><TR><TD CLASS="quote">That's cool. I guess I'd be pissed if I threw a code that didn't exist .</TD></TR></TABLE>

haha

 

maybe a short in your system somewhere, the pariod in the long -- is shorted out thus giving you a short -. make sence? probably not.

Nick

 

i did some research thats a hondata code

 

i use to thorw a phantom code but i was running a pr4 computer (i hear they do that alot) when i switched to the p75 it stopped. When it threw the code it still ran fine but throttle response was alittle weird. I know this post isnt helping but i thought id share my experience.

-Trent

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sinner &raquo;</TD></TR><TR><TD CLASS="quote">i did some research thats a hondata code
</TD></TR></TABLE>

Where can I find more information on this code? I tried searching the hondata forums and had no luck.

Khoi

 

my error.