turbo question
#1
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: Iceland, ICELAND
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
turbo question
hi i am rebulding my 1,6 vtec motor and i have put
CP 9,1 pistons
Eagle rodīs arp 2000
hondata intake gasket
Comitic headgasket 0,051"
ACL main berring
ACL rod berring
obx manifold
obx 3" downpipe
rc 1000cc injectors
is it ok for me to use turbo from ford f350 turbo disel???? and how much boost/hp can the block hold on to it is not sleeved
and also what sparkīs should i use? anybody have part number on goot bosh sparkplugs :D
sorry my english im from iceland
CP 9,1 pistons
Eagle rodīs arp 2000
hondata intake gasket
Comitic headgasket 0,051"
ACL main berring
ACL rod berring
obx manifold
obx 3" downpipe
rc 1000cc injectors
is it ok for me to use turbo from ford f350 turbo disel???? and how much boost/hp can the block hold on to it is not sleeved
and also what sparkīs should i use? anybody have part number on goot bosh sparkplugs :D
sorry my english im from iceland
#2
Junior Member
Join Date: Dec 2005
Location: somewere, tx, usa
Posts: 774
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo question (Bc3)
Well if you use the turbo from an F350 it will never spool untill redline. Just go with a t3/t4 or a t28. As long as you have a good tune then boost it a mile high.
#3
Re: turbo question (Bc3)
What are your goals/plans for the car? How much power do you want to make? We need more info.
Oh and goodluck with your obx mani. & downpipe. It is hit or miss with those things.
Oh and goodluck with your obx mani. & downpipe. It is hit or miss with those things.
#4
Honda-Tech Member
Thread Starter
Join Date: Oct 2006
Location: Iceland, ICELAND
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Re: turbo question (LaTe ApEx)
hehe i relly dont know how much i want hehe as i am the only one to build b16 motor w. turbo here in iceland hehe of course i want as many HP i can get but how much can original block take many HP... as we dont have a shop that can sell me good turbo manifold here in iceland i need import every part and need to buy the cheap crap hehe but it was lika 4xx$ for this mani and downpipe with tax it is like 800 $ when i get it in my hand so it is relly expensife for me to build this hehe wh dont got shii on this island
Alli
Alli
Thread
Thread Starter
Forum
Replies
Last Post